扫二维码与项目经理沟通
我们在微信上24小时期待你的声音
解答本文疑问/技术咨询/运营咨询/技术建议/互联网交流
一、部署软件
成都创新互联公司自2013年创立以来，是专业互联网技术服务公司，拥有项目成都网站设计、成都网站制作、外贸网站建设网站策划，项目实施与项目整合能力。我们以让每一个梦想脱颖而出为使命，1280元淮安区做网站,已为上家服务,为淮安区各地企业和个人服务,联系电话:13518219792
pc1、pc2、pc3分别安装MongoDB，操作如下：
[root@pc1 ~]# tail /etc/security/limits.conf
mongod soft nproc 40000 * hard nofile 1000000 * soft nofile 1000000 * soft core unlimited * soft stack 10240 * - nofile 65535 push - nproc 65535 push - nofile 320000 work - nproc 10000
[root@pc1 ~]# tail /etc/security/limits.d/90-nproc.conf
* soft nproc 1024 root soft nproc unlimited
[root@pc1 ~]# cat /etc/yum.repos.d/mongodb.repo
[mongodb-org-3.2] name=MongoDB Repository baseurl=https://repo.mongodb.org/yum/amazon/2013.03/mongodb-org/3.2/x86_64/ gpgcheck=1 enabled=1 gpgkey=https://www.mongodb.org/static/pgp/server-3.2.asc
[root@pc1 ~]# yum -y install mongodb-org
[root@pc1 ~]# chkconfig mongodb off
[root@pc1 ~]# mkdir -p /data/mongodb/{config,data/{config,logs,shard{1,2,3}_1}}
[root@pc1 ~]# chown -R mongod.mongod /data/mongodb
[root@pc1 ~]# cp /etc/mongod.conf /data/mongodb/config/shard1.conf
[root@pc1 ~]# tree /data/
/data/
└── mongodb
├── config
│ └── shard1.conf
└── data
├── config
├── logs
├── shard1_1
├── shard2_1
└── shard3_1
二、配置服务
副本集1的配置文件与启动脚本如下：
[root@pc1 ~]# egrep "^[^#$]" /data/mongodb/config/shard1.conf
systemLog: destination: file logAppend: true path: /data/mongodb/data/logs/shard1.log storage: dbPath: /data/mongodb/data/shard1_1 directoryPerDB: true journal: enabled: true processManagement: fork: true # fork and run in background pidFilePath: /var/run/mongodb/shard1.pid # location of pidfile net: port: 27027 #bindIp: 127.0.0.1 # Listen to local interface only, comment to listen on all interfaces. replication: oplogSizeMB: 500 replSetName: shard1 sharding: clusterRole: shardsvr
[root@pc1 ~]# cp /etc/init.d/mongod /etc/init.d/shard1
[root@pc1 ~]# vim /etc/init.d/shard1
[root@pc1 ~]# egrep "^[^#$]" /etc/init.d/shard1
. /etc/rc.d/init.d/functions
CONFIGFILE="/data/mongodb/config/shard1.conf"
OPTIONS=" -f $CONFIGFILE"
mongod=${MONGOD-/usr/bin/mongod}
MONGO_USER=mongod
MONGO_GROUP=mongod
SYSCONFIG="/etc/sysconfig/mongod"
if [ -f "$SYSCONFIG" ]; then
. "$SYSCONFIG"
fi
NUMACTL_ARGS="--interleave=all"
if which numactl >/dev/null 2>/dev/null && numactl $NUMACTL_ARGS ls / >/dev/null 2>/dev/null
then
NUMACTL="numactl $NUMACTL_ARGS"
else
NUMACTL=""
fi
PIDFILEPATH=`awk -F'[:=]' -v IGNORECASE=1 '/^[[:blank:]]*(processManagement\.)?pidfilepath[[:blank:]]*[:=][[:blank:]]*/{print $2}' "$CONFIGFILE" | tr -d "[:blank:]\"'" | awk -F'#' '{print $1}'`
PIDDIR=`dirname $PIDFILEPATH`
start()
{
# Make sure the default pidfile directory exists
if [ ! -d $PIDDIR ]; then
install -d -m 0755 -o $MONGO_USER -g $MONGO_GROUP $PIDDIR
fi
if test -f /sys/kernel/mm/transparent_hugepage/defrag; then
echo never > /sys/kernel/mm/transparent_hugepage/defrag
fi
# Recommended ulimit values for mongod or mongos
# See http://docs.mongodb.org/manual/reference/ulimit/#recommended-settings
#
ulimit -f unlimited
ulimit -t unlimited
ulimit -v unlimited
ulimit -n 64000
ulimit -m unlimited
ulimit -u 64000
echo -n $"Starting mongod: "
daemon --user "$MONGO_USER" --check $mongod "$NUMACTL $mongod $OPTIONS >/dev/null 2>&1"
RETVAL=$?
echo
[ $RETVAL -eq 0 ] && touch /var/lock/subsys/shard1
}
stop()
{
echo -n $"Stopping mongod: "
mongo_killproc "$PIDFILEPATH" $mongod
RETVAL=$?
echo
[ $RETVAL -eq 0 ] && rm -f /var/lock/subsys/shard1
}
restart () {
stop
start
}
mongo_killproc()
{
local pid_file=$1
local procname=$2
local -i delay=300
local -i duration=10
local pid=`pidofproc -p "${pid_file}" ${procname}`
kill -TERM $pid >/dev/null 2>&1
usleep 100000
local -i x=0
while [ $x -le $delay ] && checkpid $pid; do
sleep $duration
x=$(( $x + $duration))
done
kill -KILL $pid >/dev/null 2>&1
usleep 100000
checkpid $pid # returns 0 only if the process exists
local RC=$?
[ "$RC" -eq 0 ] && failure "${procname} shutdown" || rm -f "${pid_file}"; success "${procname} shutdown"
RC=$((! $RC)) # invert return code so we return 0 when process is dead.
return $RC
}
RETVAL=0
case "$1" in
start)
start
;;
stop)
stop
;;
restart|reload|force-reload)
restart
;;
condrestart)
[ -f /var/lock/subsys/shard1 ] && restart || :
;;
status)
status $mongod
RETVAL=$?
;;
*)
echo "Usage: $0 {start|stop|status|restart|reload|force-reload|condrestart}"
RETVAL=1
esac
exit $RETVAL副本集2的配置文件与启动脚本如下：
[root@pc1 ~]# egrep "^[^#$]" /data/mongodb/config/shard2.conf
systemLog: destination: file logAppend: true path: /data/mongodb/data/logs/shard2.log storage: dbPath: /data/mongodb/data/shard2_1 directoryPerDB: true journal: enabled: true processManagement: fork: true # fork and run in background pidFilePath: /var/run/mongodb/shard2.pid # location of pidfile net: port: 27028 #bindIp: 127.0.0.1 # Listen to local interface only, comment to listen on all interfaces. replication: oplogSizeMB: 500 replSetName: shard2 sharding: clusterRole: shardsvr
[root@pc1 ~]# cp /etc/init.d/mongod /etc/init.d/shard2
[root@pc1 ~]# vim /etc/init.d/shard2
[root@pc1 ~]# egrep "^[^#$]" /etc/init.d/shard2
. /etc/rc.d/init.d/functions
CONFIGFILE="/data/mongodb/config/shard2.conf"
OPTIONS=" -f $CONFIGFILE"
mongod=${MONGOD-/usr/bin/mongod}
MONGO_USER=mongod
MONGO_GROUP=mongod
SYSCONFIG="/etc/sysconfig/mongod"
if [ -f "$SYSCONFIG" ]; then
. "$SYSCONFIG"
fi
NUMACTL_ARGS="--interleave=all"
if which numactl >/dev/null 2>/dev/null && numactl $NUMACTL_ARGS ls / >/dev/null 2>/dev/null
then
NUMACTL="numactl $NUMACTL_ARGS"
else
NUMACTL=""
fi
PIDFILEPATH=`awk -F'[:=]' -v IGNORECASE=1 '/^[[:blank:]]*(processManagement\.)?pidfilepath[[:blank:]]*[:=][[:blank:]]*/{print $2}' "$CONFIGFILE" | tr -d "[:blank:]\"'" | awk -F'#' '{print $1}'`
PIDDIR=`dirname $PIDFILEPATH`
start()
{
# Make sure the default pidfile directory exists
if [ ! -d $PIDDIR ]; then
install -d -m 0755 -o $MONGO_USER -g $MONGO_GROUP $PIDDIR
fi
if test -f /sys/kernel/mm/transparent_hugepage/defrag; then
echo never > /sys/kernel/mm/transparent_hugepage/defrag
fi
# Recommended ulimit values for mongod or mongos
# See http://docs.mongodb.org/manual/reference/ulimit/#recommended-settings
#
ulimit -f unlimited
ulimit -t unlimited
ulimit -v unlimited
ulimit -n 64000
ulimit -m unlimited
ulimit -u 64000
echo -n $"Starting mongod: "
daemon --user "$MONGO_USER" --check $mongod "$NUMACTL $mongod $OPTIONS >/dev/null 2>&1"
RETVAL=$?
echo
[ $RETVAL -eq 0 ] && touch /var/lock/subsys/shard2
}
stop()
{
echo -n $"Stopping mongod: "
mongo_killproc "$PIDFILEPATH" $mongod
RETVAL=$?
echo
[ $RETVAL -eq 0 ] && rm -f /var/lock/subsys/shard2
}
restart () {
stop
start
}
mongo_killproc()
{
local pid_file=$1
local procname=$2
local -i delay=300
local -i duration=10
local pid=`pidofproc -p "${pid_file}" ${procname}`
kill -TERM $pid >/dev/null 2>&1
usleep 100000
local -i x=0
while [ $x -le $delay ] && checkpid $pid; do
sleep $duration
x=$(( $x + $duration))
done
kill -KILL $pid >/dev/null 2>&1
usleep 100000
checkpid $pid # returns 0 only if the process exists
local RC=$?
[ "$RC" -eq 0 ] && failure "${procname} shutdown" || rm -f "${pid_file}"; success "${procname} shutdown"
RC=$((! $RC)) # invert return code so we return 0 when process is dead.
return $RC
}
RETVAL=0
case "$1" in
start)
start
;;
stop)
stop
;;
restart|reload|force-reload)
restart
;;
condrestart)
[ -f /var/lock/subsys/shard2 ] && restart || :
;;
status)
status $mongod
RETVAL=$?
;;
*)
echo "Usage: $0 {start|stop|status|restart|reload|force-reload|condrestart}"
RETVAL=1
esac
exit $RETVAL副本集3的配置文件与启动脚本如下：
[root@pc1 ~]# egrep "^[^#$]" /data/mongodb/config/shard3.conf
systemLog: destination: file logAppend: true path: /data/mongodb/data/logs/shard3.log storage: dbPath: /data/mongodb/data/shard3_1 directoryPerDB: true journal: enabled: true processManagement: fork: true # fork and run in background pidFilePath: /var/run/mongodb/shard3.pid # location of pidfile net: port: 27026 #bindIp: 127.0.0.1 # Listen to local interface only, comment to listen on all interfaces. replication: oplogSizeMB: 500 replSetName: shard3 sharding: clusterRole: shardsvr
[root@pc1 ~]# cp /etc/init.d/mongod /etc/init.d/shard3
[root@pc1 ~]# vim /etc/init.d/shard3
[root@pc1 ~]# egrep "^[^#$]" /etc/init.d/shard3 (略，内容基本与shard2 、shard1相同)
复制配置文件到pc2、pc3，并启动服务
[root@pc1 ~]# scp /data/mongodb/config/*.conf pc2:/data/mongodb/config/
[root@pc1 ~]# scp /etc/init.d/shard* pc2:/etc/init.d/
[root@pc1 ~]# scp /data/mongodb/config/*.conf pc3:/data/mongodb/config/
[root@pc1 ~]# scp /etc/init.d/shard* pc2:/etc/init.d/
[root@pc1 ~]#
[root@pc1 ~]# /etc/init.d/shard1 start
[root@pc1 ~]# ssh pc2 '/etc/init.d/shard1 start'
[root@pc1 ~]# ssh pc3 '/etc/init.d/shard1 start'
[root@pc1 ~]# /etc/init.d/shard2 start
[root@pc1 ~]# ssh pc2 '/etc/init.d/shard2 start'
[root@pc1 ~]# ssh pc3 '/etc/init.d/shard2 start'
[root@pc1 ~]# /etc/init.d/shard3 start
[root@pc1 ~]# ssh pc2 '/etc/init.d/shard3 start'
[root@pc1 ~]# ssh pc3 '/etc/init.d/shard3 start'
配置副本集1如下操作：
[root@pc1 ~]# mongo localhost:27027
MongoDB shell version: 3.2.7
connecting to: localhost:27027/test
> use admin
switched to db admin
> rs.initiate()
{
"info2" : "no configuration specified. Using a default configuration for the set",
"me" : "pc1:27027",
"ok" : 1
}
shard1:OTHER> rs.add("pc2:27027")
{ "ok" : 1 }
shard1:PRIMARY> rs.addArb("pc3:27027")
{ "ok" : 1 }
shard1:PRIMARY> rs.status()
{
"set" : "shard1",
"date" : ISODate("2016-06-28T03:59:41.403Z"),
"myState" : 1,
"term" : NumberLong(1),
"heartbeatIntervalMillis" : NumberLong(2000),
"members" : [
{
"_id" : 0,
"name" : "pc1:27027",
"health" : 1,
"state" : 1,
"stateStr" : "PRIMARY",
"uptime" : 1634,
"optime" : {
"ts" : Timestamp(1467086346, 1),
"t" : NumberLong(1)
},
"optimeDate" : ISODate("2016-06-28T03:59:06Z"),
"infoMessage" : "could not find member to sync from",
"electionTime" : Timestamp(1467086301, 2),
"electionDate" : ISODate("2016-06-28T03:58:21Z"),
"configVersion" : 3,
"self" : true
},
{
"_id" : 1,
"name" : "pc2:27027",
"health" : 1,
"state" : 2,
"stateStr" : "SECONDARY",
"uptime" : 54,
"optime" : {
"ts" : Timestamp(1467086346, 1),
"t" : NumberLong(1)
},
"optimeDate" : ISODate("2016-06-28T03:59:06Z"),
"lastHeartbeat" : ISODate("2016-06-28T03:59:40.050Z"),
"lastHeartbeatRecv" : ISODate("2016-06-28T03:59:41.041Z"),
"pingMs" : NumberLong(1),
"syncingTo" : "pc1:27027",
"configVersion" : 3
},
{
"_id" : 2,
"name" : "pc3:27027",
"health" : 1,
"state" : 7,
"stateStr" : "ARBITER",
"uptime" : 35,
"lastHeartbeat" : ISODate("2016-06-28T03:59:40.053Z"),
"lastHeartbeatRecv" : ISODate("2016-06-28T03:59:41.044Z"),
"pingMs" : NumberLong(2),
"configVersion" : 3
}
],
"ok" : 1
}配置副本集2、配置副本集3的操作与配置副本集基本相同，本文不再罗嗦。注意：配置副本集1时，pc1为primary、pc2为secondary，而pc3为arbiter；配置副本集2时，pc2为primary、pc3为secondary，而pc1为arbiter；配置副本集3时，pc3为primary、pc1为secondary，而pc2为arbiter。
config server的配置文件与启动文件如下：
[[root@pc1 ~]# egrep "^[^#$]" /data/mongodb/config/config.conf
systemLog: destination: file logAppend: true path: /data/mongodb/data/logs/config.log storage: dbPath: /data/mongodb/data/config directoryPerDB: true journal: enabled: true processManagement: fork: true # fork and run in background pidFilePath: /var/run/mongodb/config.pid # location of pidfile net: port: 27029 #bindIp: 127.0.0.1 # Listen to local interface only, comment to listen on all interfaces. replication: oplogSizeMB: 500 replSetName: configrs sharding: clusterRole: configsvr
[root@pc1 ~]# cp /etc/init.d/mongod /etc/init.d/mconfig
[root@pc1 ~]# vim /etc/init.d/mconfig
[root@pc1 ~]# egrep "^[^#$]" /etc/init.d/mconfig
. /etc/rc.d/init.d/functions
CONFIGFILE="/data/mongodb/config/config.conf"
OPTIONS=" -f $CONFIGFILE"
mongod=${MONGOD-/usr/bin/mongod}
MONGO_USER=mongod
MONGO_GROUP=mongod
SYSCONFIG="/etc/sysconfig/mongod"
if [ -f "$SYSCONFIG" ]; then
. "$SYSCONFIG"
fi
NUMACTL_ARGS="--interleave=all"
if which numactl >/dev/null 2>/dev/null && numactl $NUMACTL_ARGS ls / >/dev/null 2>/dev/null
then
NUMACTL="numactl $NUMACTL_ARGS"
else
NUMACTL=""
fi
PIDFILEPATH=`awk -F'[:=]' -v IGNORECASE=1 '/^[[:blank:]]*(processManagement\.)?pidfilepath[[:blank:]]*[:=][[:blank:]]*/{print $2}' "$CONFIGFILE" | tr -d "[:blank:]\"'" | awk -F'#' '{print $1}'`
PIDDIR=`dirname $PIDFILEPATH`
start()
{
# Make sure the default pidfile directory exists
if [ ! -d $PIDDIR ]; then
install -d -m 0755 -o $MONGO_USER -g $MONGO_GROUP $PIDDIR
fi
if test -f /sys/kernel/mm/transparent_hugepage/defrag; then
echo never > /sys/kernel/mm/transparent_hugepage/defrag
fi
# Recommended ulimit values for mongod or mongos
# See http://docs.mongodb.org/manual/reference/ulimit/#recommended-settings
ulimit -f unlimited
ulimit -t unlimited
ulimit -v unlimited
ulimit -n 64000
ulimit -m unlimited
ulimit -u 64000
echo -n $"Starting mongod: "
daemon --user "$MONGO_USER" --check $mongod "$NUMACTL $mongod $OPTIONS >/dev/null 2>&1"
RETVAL=$?
echo
[ $RETVAL -eq 0 ] && touch /var/lock/subsys/mconfig
}
stop()
{
echo -n $"Stopping mongod: "
mongo_killproc "$PIDFILEPATH" $mongod
RETVAL=$?
echo
[ $RETVAL -eq 0 ] && rm -f /var/lock/subsys/mconfig
}
restart () {
stop
start
}
mongo_killproc()
{
local pid_file=$1
local procname=$2
local -i delay=300
local -i duration=10
local pid=`pidofproc -p "${pid_file}" ${procname}`
kill -TERM $pid >/dev/null 2>&1
usleep 100000
local -i x=0
while [ $x -le $delay ] && checkpid $pid; do
sleep $duration
x=$(( $x + $duration))
done
kill -KILL $pid >/dev/null 2>&1
usleep 100000
checkpid $pid # returns 0 only if the process exists
local RC=$?
[ "$RC" -eq 0 ] && failure "${procname} shutdown" || rm -f "${pid_file}"; success "${procname} shutdown"
RC=$((! $RC)) # invert return code so we return 0 when process is dead.
return $RC
}
RETVAL=0
case "$1" in
start)
start
;;
stop)
stop
;;
restart|reload|force-reload)
restart
;;
condrestart)
[ -f /var/lock/subsys/mconfig ] && restart || :
;;
status)
status $mongod
RETVAL=$?
;;
*)
echo "Usage: $0 {start|stop|status|restart|reload|force-reload|condrestart}"
RETVAL=1
esac
exit $RETVAL[root@pc1 ~]# scp /data/mongodb/config/config.conf pc2:/data/mongodb/config
[root@pc1 ~]# scp /etc/init.d/mconfig pc2:/etc/init.d/
[root@pc1 ~]#
[root@pc1 ~]# scp /data/mongodb/config/config.conf pc2:/data/mongodb/config
[root@pc1 ~]# scp /etc/init.d/mconfig pc3:/etc/init.d/
[root@pc1 ~]#
[root@pc1 ~]# /etc/init.d/mconfig start
Starting mongod: [确定]
[root@pc1 ~]# lsof -i:27029
COMMAND PID USER FD TYPE DEVICE SIZE/OFF NODE NAME
mongod 2765 mongod 6u IPv4 11520 0t0 TCP *:27029 (LISTEN)
[root@pc1 ~]# ssh pc2 '/etc/init.d/mconfig start'
[root@pc1 ~]# ssh pc2 '/etc/init.d/mconfig start'
为了保持config server的一致性，实现各config server的副本集功能，完成效果如下所示(config server的副本集不支持使用arbiter)：
[root@pc1 ~]# mongo localhost:27029
MongoDB shell version: 3.2.7
connecting to: localhost:27029/test
configrs:SECONDARY> use admin
switched to db admin
configrs:SECONDARY> rs.slaveOk()
configrs:SECONDARY> rs.status()
{
"set" : "configrs",
"date" : ISODate("2016-07-01T03:25:49.471Z"),
"myState" : 2,
"term" : NumberLong(2),
"syncingTo" : "pc3:27029",
"configsvr" : true,
"heartbeatIntervalMillis" : NumberLong(2000),
"members" : [
{
"_id" : 0,
"name" : "pc1:27029",
"health" : 1,
"state" : 2,
"stateStr" : "SECONDARY",
"uptime" : 3937,
"optime" : {
"ts" : Timestamp(1467339616, 1),
"t" : NumberLong(2)
},
"optimeDate" : ISODate("2016-07-01T02:20:16Z"),
"syncingTo" : "pc3:27029",
"configVersion" : 3,
"self" : true
},
{
"_id" : 1,
"name" : "pc2:27029",
"health" : 1,
"state" : 2,
"stateStr" : "SECONDARY",
"uptime" : 3936,
"optime" : {
"ts" : Timestamp(1467339616, 1),
"t" : NumberLong(2)
},
"optimeDate" : ISODate("2016-07-01T02:20:16Z"),
"lastHeartbeat" : ISODate("2016-07-01T03:25:48.578Z"),
"lastHeartbeatRecv" : ISODate("2016-07-01T03:25:47.481Z"),
"pingMs" : NumberLong(1),
"syncingTo" : "pc3:27029",
"configVersion" : 3
},
{
"_id" : 2,
"name" : "pc3:27029",
"health" : 1,
"state" : 1,
"stateStr" : "PRIMARY",
"uptime" : 3936,
"optime" : {
"ts" : Timestamp(1467339616, 1),
"t" : NumberLong(2)
},
"optimeDate" : ISODate("2016-07-01T02:20:16Z"),
"lastHeartbeat" : ISODate("2016-07-01T03:25:49.146Z"),
"lastHeartbeatRecv" : ISODate("2016-07-01T03:25:47.585Z"),
"pingMs" : NumberLong(1),
"electionTime" : Timestamp(1467339615, 1),
"electionDate" : ISODate("2016-07-01T02:20:15Z"),
"configVersion" : 3
}
],
"ok" : 1
}
configrs:SECONDARY> exit
bye
[root@pc1 ~]#mongos路由配置文件与启动脚本内容如下：
[root@pc1 ~]# egrep "^[^#$]" /data/mongodb/config/mongos.conf
systemLog: destination: file logAppend: true path: /data/mongodb/data/logs/mongos.log processManagement: fork: true # fork and run in background pidFilePath: /var/run/mongodb/mongos.pid # location of pidfile net: port: 27017 #bindIp: 127.0.0.1 # Listen to local interface only, comment to listen on all interfaces. sharding: configDB: pc1:27029,pc2:27029,pc3:27029 #注: mongodb3.4时格式必须为 configDB: configrs_name/configServer_list
[root@pc1 ~]# cp /etc/init.d/mongod /etc/init.d/mongos
[root@pc1 ~]# vim /etc/init.d/mongos
[root@pc1 ~]# egrep "^[^#$]" /etc/init.d/mongos
. /etc/rc.d/init.d/functions
CONFIGFILE="/data/mongodb/config/mongos.conf"
OPTIONS=" -f $CONFIGFILE"
mongod=${MONGOD-/usr/bin/mongos}
MONGO_USER=mongod
MONGO_GROUP=mongod
SYSCONFIG="/etc/sysconfig/mongod"
if [ -f "$SYSCONFIG" ]; then
. "$SYSCONFIG"
fi
NUMACTL_ARGS="--interleave=all"
if which numactl >/dev/null 2>/dev/null && numactl $NUMACTL_ARGS ls / >/dev/null 2>/dev/null
then
NUMACTL="numactl $NUMACTL_ARGS"
else
NUMACTL=""
fi
PIDFILEPATH=`awk -F'[:=]' -v IGNORECASE=1 '/^[[:blank:]]*(processManagement\.)?pidfilepath[[:blank:]]*[:=][[:blank:]]*/{print $2}' "$CONFIGFILE" | tr -d "[:blank:]\"'" | awk -F'#' '{print $1}'`
PIDDIR=`dirname $PIDFILEPATH`
start()
{
# Make sure the default pidfile directory exists
if [ ! -d $PIDDIR ]; then
install -d -m 0755 -o $MONGO_USER -g $MONGO_GROUP $PIDDIR
fi
if test -f /sys/kernel/mm/transparent_hugepage/defrag; then
echo never > /sys/kernel/mm/transparent_hugepage/defrag
fi
# Recommended ulimit values for mongod or mongos
# See http://docs.mongodb.org/manual/reference/ulimit/#recommended-settings
#
ulimit -f unlimited
ulimit -t unlimited
ulimit -v unlimited
ulimit -n 64000
ulimit -m unlimited
ulimit -u 64000
echo -n $"Starting mongod: "
daemon --user "$MONGO_USER" --check $mongod "$NUMACTL $mongod $OPTIONS >/dev/null 2>&1"
RETVAL=$?
echo
[ $RETVAL -eq 0 ] && touch /var/lock/subsys/mongos
}
stop()
{
echo -n $"Stopping mongod: "
mongo_killproc "$PIDFILEPATH" $mongod
RETVAL=$?
echo
[ $RETVAL -eq 0 ] && rm -f /var/lock/subsys/mongos
}
restart () {
stop
start
}
mongo_killproc()
{
local pid_file=$1
local procname=$2
local -i delay=300
local -i duration=10
local pid=`pidofproc -p "${pid_file}" ${procname}`
kill -TERM $pid >/dev/null 2>&1
usleep 100000
local -i x=0
while [ $x -le $delay ] && checkpid $pid; do
sleep $duration
x=$(( $x + $duration))
done
kill -KILL $pid >/dev/null 2>&1
usleep 100000
checkpid $pid # returns 0 only if the process exists
local RC=$?
[ "$RC" -eq 0 ] && failure "${procname} shutdown" || rm -f "${pid_file}"; success "${procname} shutdown"
RC=$((! $RC)) # invert return code so we return 0 when process is dead.
return $RC
}
RETVAL=0
case "$1" in
start)
start
;;
stop)
stop
;;
restart|reload|force-reload)
restart
;;
condrestart)
[ -f /var/lock/subsys/mongos ] && restart || :
;;
status)
status $mongod
RETVAL=$?
;;
*)
echo "Usage: $0 {start|stop|status|restart|reload|force-reload|condrestart}"
RETVAL=1
esac
exit $RETVAL[root@pc1 ~]# scp /data/mongodb/config/mongos pc2:/data/mongodb/config/
[root@pc1 ~]# scp /etc/init.d/mongos pc2:/etc/init.d/
[root@pc1 ~]# scp /data/mongodb/config/mongos pc3:/data/mongodb/config/
[root@pc1 ~]# scp /etc/init.d/mongos pc3:/etc/init.d/
[root@pc1 ~]# /etc/init.d/mongos start
Starting mongod: [确定]
[root@pc1 ~]# ssh pc2 '/etc/init.d/mongos start'
Starting mongod: [确定]
[root@pc1 ~]# ssh pc3 '/etc/init.d/mongos start'
Starting mongod: [确定]
[root@pc1 ~]#
有些网朋友说：需要实现mongos路由的副本集（即多台mongos路由之间的复制），但从原理分析，我个人没能理解这种方案的功能，当然本人也尝试过，发现设置副本集之后mongos服务无法启动（并无深入研究，请各位朋友提宝贝意见）
三、实现分片
连接到任何一台mongos路由上，操作如下：
[root@pc1 ~]# mongo
MongoDB shell version: 3.2.7
connecting to: test
mongos> use admin
switched to db admin
mongos> sh.status()
--- Sharding Status ---
sharding version: {
"_id" : 1,
"minCompatibleVersion" : 5,
"currentVersion" : 6,
"clusterId" : ObjectId("577226b7511b1f96da0ddba2")
}
shards:
active mongoses:
"3.2.7" : 3
balancer:
Currently enabled: yes
Currently running: no
Failed balancer rounds in last 5 attempts: 0
Migration Results for the last 24 hours:
No recent migrations
databases:mongos> sh.addShard("shard1/pc1:27027")
{ "shardAdded" : "shard1", "ok" : 1 }
mongos> sh.addShard("shard3/pc2:27026")
{ "shardAdded" : "shard3", "ok" : 1 }
mongos> sh.addShard("shard2/pc3:27028")
{ "shardAdded" : "shard2", "ok" : 1 }
mongos> sh.status()
--- Sharding Status ---
sharding version: {
"_id" : 1,
"minCompatibleVersion" : 5,
"currentVersion" : 6,
"clusterId" : ObjectId("577226b7511b1f96da0ddba2")
}
shards:
{ "_id" : "shard1", "host" : "shard1/pc1:27027,pc2:27027" }
{ "_id" : "shard2", "host" : "shard2/pc1:27028,pc3:27028" }
{ "_id" : "shard3", "host" : "shard3/pc2:27026,pc3:27026" }
active mongoses:
"3.2.7" : 3
balancer:
Currently enabled: yes
Currently running: no
Failed balancer rounds in last 5 attempts: 5
Last reported error: mongos specified a different config database string : stored : pc1:27029 vs given : pc1:27029,pc2:27029,pc3:27029
Time of Reported error: Tue Jun 28 2016 07:34:07 GMT+0000 (UTC)
Migration Results for the last 24 hours:
No recent migrations
databases:mongos> use config
switched to db config
mongos> db.chunks.find()
mongos> db.settings.find()
{ "_id" : "chunksize", "value" : NumberLong(64) }
mongos> db.settings.save({"_id":"chunksize","value":NumberLong(5)}) #不建议修改chunk的值，本例为了实例效果改为5M。最小的chunksize(1M)，默认chunksize为64M
WriteResult({ "nMatched" : 1, "nUpserted" : 0, "nModified" : 1 })
mongos> db.settings.find()
{ "_id" : "chunksize", "value" : NumberLong(5) }
mongos> use admin
switched to db admin
mongos> sh.enableSharding("test")
{ "ok" : 1 }
mongos> sh.shardCollection("test.user",{uid:1})
{ "collectionsharded" : "test.user", "ok" : 1 }
mongos> use test
switched to db test
mongos> db.use.ensureIndex({uid:1})
{
"raw" : {
"shard1/pc1:27027,pc2:27027" : {
"createdCollectionAutomatically" : true,
"numIndexesBefore" : 1,
"numIndexesAfter" : 2,
"ok" : 1,
"$gleStats" : {
"lastOpTime" : Timestamp(1467102931, 2),
"electionId" : ObjectId("7fffffff0000000000000001")
}
}
},
"ok" : 1
}mongos> for (i=1;i<=100000;i++) db.user.insert({uid:'user'+i,age:(i%15),address:'#'+i+',shangdi south road,beijing',preferbooks:['book'+i,'hello world']})
WriteResult({ "nInserted" : 1 })
mongos> sh.status()
--- Sharding Status ---
sharding version: {
"_id" : 1,
"minCompatibleVersion" : 5,
"currentVersion" : 6,
"clusterId" : ObjectId("577234b7c92b86a15a2901d4")
}
shards:
{ "_id" : "shard1", "host" : "shard1/pc1:27027,pc2:27027" }
{ "_id" : "shard2", "host" : "shard2/pc2:27028,pc3:27028" }
{ "_id" : "shard3", "host" : "shard3/pc1:27026,pc3:27026" }
active mongoses:
"3.2.7" : 3
balancer:
Currently enabled: yes
Currently running: no
Failed balancer rounds in last 5 attempts: 0
Migration Results for the last 24 hours:
2 : Success
1 : Failed with error 'aborted', from shard1 to shard2
databases:
{ "_id" : "test", "primary" : "shard1", "partitioned" : true }
test.user
shard key: { "uid" : 1 }
unique: false
balancing: true
chunks:
shard11
shard21
shard31
{ "uid" : { "$minKey" : 1 } } -->> { "uid" : "user2" } on : shard2 Timestamp(2, 0)
{ "uid" : "user2" } -->> { "uid" : "user8" } on : shard3 Timestamp(3, 0)
{ "uid" : "user8" } -->> { "uid" : { "$maxKey" : 1 } } on : shard1 Timestamp(3, 1)mongos> use config
switched to db config
mongos> show collections
actionlog changelog chunks collections databases lockpings locks mongos settings shards tags version
mongos> db.settings.find()
{ "_id" : "chunksize", "value" : NumberLong(64) }mongos> db.shards.find()
{ "_id" : "shard1", "host" : "shard1/pc1:27027,pc2:27027" }
{ "_id" : "shard3", "host" : "shard3/pc1:27026,pc3:27026" }
{ "_id" : "shard2", "host" : "shard2/pc2:27028,pc3:27028" }mongos> db.databases.find()
{ "_id" : "test", "primary" : "shard1", "partitioned" : true }mongos> db.chunks.find()
{ "_id" : "test.user-uid_MinKey", "lastmod" : Timestamp(2, 0), "lastmodEpoch" : ObjectId("57723675c92b86a15a290209"), "ns" : "test.user", "min" : { "uid" : { "$minKey" : 1 } }, "max" : { "uid" : "user2" }, "shard" : "shard2" }
{ "_id" : "test.user-uid_\"user2\"", "lastmod" : Timestamp(3, 0), "lastmodEpoch" : ObjectId("57723675c92b86a15a290209"), "ns" : "test.user", "min" : { "uid" : "user2" }, "max" : { "uid" : "user8" }, "shard" : "shard3" }
{ "_id" : "test.user-uid_\"user8\"", "lastmod" : Timestamp(3, 1), "lastmodEpoch" : ObjectId("57723675c92b86a15a290209"), "ns" : "test.user", "min" : { "uid" : "user8" }, "max" : { "uid" : { "$maxKey" : 1 } }, "shard" : "shard1" }mongos>exit
四、补充命令
db.runCommand({addshard:"shard1/pc1:27027,pc2:27027,pc3:27027”,name:"shard1"});
db.runCommand({addshard:"shard2/pc1:27028,pc2:27028,pc3:27028”,name:"shard2"});
db.runCommand({addshard:"shard3/pc1:27026,pc2:27026,pc3:27026”,name:"shard3"});
use admin
db.runCommand({enablesharding:"db_name"})
db.runCommand({shardcollection:"db_name.collection_name",key:{fields_name:"hashed"}})
db.runCommand({shardcollection:"db_name.collection_name",key:{fields_name:1}})
sh.shardCollection("db_name.collection_name",{fields_name1:1,fields_name2:1})
我们在微信上24小时期待你的声音
解答本文疑问/技术咨询/运营咨询/技术建议/互联网交流
微信二维码
移动版官网