扫二维码与项目经理沟通
我们在微信上24小时期待你的声音
解答本文疑问/技术咨询/运营咨询/技术建议/互联网交流
创新互联公司是专业的乌拉特前网站建设公司，乌拉特前接单;提供成都网站设计、网站建设,网页设计,网站设计,建网站,PHP网站建设等专业做网站服务;采用PHP框架,可快速的进行乌拉特前网站开发网页制作和功能扩展;专业做搜索引擎喜爱的网站,专业的做网站团队,希望更多企业前来合作!
5，6版本:system-config-network(setup)
配置文件位置：/etc/sysconfig/network-scripts/ifcfg-eth[0-n]
7版本：nmcil nmtui(图形界面)
配置文件位置：/etc/sysconfig/network-scripts/ifcfg-en*****
ifcfg-eth0,ifcfg-en******网络配置文件信息
TYPE=Ethernet #接口类型为以太网卡 BOOTPROTO=none #获取地址协议dhcp(自动获取)，static(手动配置)，none HWADDR=00:0C:29:75:A1:89 #网卡MAC UUID=be9d332f-ae79-42b6-8040-d2d431e4e195 #网卡标识 #DEVICE=eno16777736 #7系列的网卡名称 DEVICE=eth0 #5,6系列的网卡名 ONBOOT=yes #开机自动激活网卡，no不激活 IPADDR=10.76.249.91 GATEWAY=10.76.249.2 NETMASK=255.255.255.0 DNS=8.8.4.4 |
临时添加IP地址,重启后失效
ip addr add 192.168.1.150/24 dev eth0 或者 # ifconfig eth0 192.168.1.150/24 up #重启后会失效，第一张网卡为eth0，第二张为eth2依此类推 # ifconfig eth0 1.1 Link encap:Ethernet HWaddr 00:0C:29:75:A1:89 inet addr:192.168.1.150 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::20c:29ff:fe75:a189/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:5682 errors:0 dropped:0 overruns:0 frame:0 TX packets:4136 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:412252 (402.5 KiB) TX bytes:4464715 (4.2 MiB) |
# ip route add default via 192.168.1.1 #default via192.168.1.1devinterface |
# ip addr show 1: lo: link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eno16777736: link/ether 200:0c:29:e1:c5:8a brd ff:ff:ff:ff:ff:ff inet 310.76.249.91/24 brd 10.76.249.255 scope global eno16777736 valid_lft forever preferred_lft forever inet6 fe80::20c:29ff:fee1:c58a/64 scope link valid_lft forever preferred_lft forever 1：网卡状态已经启动 2：网卡的mac地址 3：网卡”eno16777736”地址 或者 # ifconfig eth0 Link encap:Ethernet HWaddr 00:0C:29:75:A1:89 inet addr:192.168.1.150 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::20c:29ff:fe75:a189/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:6386 errors:0 dropped:0 overruns:0 frame:0 TX packets:4436 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:467110 (456.1 KiB) TX bytes:4502451 (4.2 MiB)
lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:66 errors:0 dropped:0 overruns:0 frame:0 TX packets:66 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:3482 (3.4 KiB) TX bytes:3482 (3.4 KiB) 或者 #nmcli dev show eth0 GENERAL.设备: eth0 GENERAL.类型: ethernet GENERAL.硬盘: 00:0C:29:E1:C5:8A GENERAL.MTU: 1500 GENERAL.状态: 100 (连接的) GENERAL.CONNECTION: eno16777736 GENERAL.CON-PATH: /org/freedesktop/NetworkManager/ActiveConnection/1 WIRED-PROPERTIES.容器: 开 IP4.地址[1]: 10.76.249.91/24 IP4.网关: 10.76.249.2 IP6.地址[1]: fe80::20c:29ff:fee1:c58a/64 IP6.网关: |
# ip -s link show eth0 2: eth0: link/ether 00:0c:29:75:a1:89 brd ff:ff:ff:ff:ff:ff RX: bytes packets errors dropped overrun mcast 477844 6528 0 0 0 0 TX: bytes packets errors dropped carrier collsns 4508951 4492 0 0 0 0 或者 # ifconfig –s eth0 Iface MTU Met RX-OK RX-ERR RX-DRP RX-OVR TX-OK TX-ERR TX-DRP TX-OVR Flg eth0 1500 0 6459 0 0 0 4455 0 0 0 BMRU
|
#ip route default via 10.76.249.2 dev eth0 proto static metric 100 10.76.249.0/24 dev eth0 proto kernel scope link src 10.76.249.91 metric 100 |
常用到的选项
ss和netstat使用方法相似，但是ss效率要比较高，消耗性能比较少。
选项 | 功能 |
-l | 监听状态的连接 |
-n | 不解析服务名以数字显示 |
-t | 显示TCP连接 |
-u | 显示UDP连接 |
-a | 显示所有状态 |
-p | 显示以哪个进程发起的连接 |
常用的组合
-tan,-tanl, -tanlp, -uan
几种状态信息
State: LISTEN（监听），ESTAB(已建立的链接)
# ss -tna State Recv-Q Send-Q Local Address:Port本地端口 Peer Address:Port客户端端口 LISTEN 0 128 :::22 :::* LISTEN 0 128 *:22 *:* LISTEN 0 128 127.0.0.1:6010 *:* LISTEN 0 128 ::1:6010 :::* LISTEN 0 128 127.0.0.1:6011 *:* LISTEN 0 128 ::1:6011 :::* LISTEN 0 128 127.0.0.1:6012 *:* LISTEN 0 128 ::1:6012 :::* LISTEN 0 128 127.0.0.1:6013 *:* LISTEN 0 128 ::1:6013 :::* ESTAB 0 0 192.168.1.106:22 192.168.1.103:63167 ESTAB 0 0 192.168.1.150:22 192.168.1.103:63753 ESTAB 0 52 192.168.1.150:22 192.168.1.103:54953 ESTAB 0 0 192.168.1.106:22 192.168.1.103:63134 |
修改网卡文件内容
# cat /etc/sysconfig/network-scripts/ifcfg- eno16777736 TYPE=Ethernet BOOTPROTO=none DEFROUTE=yes PEERDNS=yes PEERROUTES=yes NAME=eno16777736 UUID=be9d332f-ae79-42b6-8040-d2d431e4e195 #DEVICE=eno16777736 #注释掉原来的命名 DEVICE=eth0 #传统命名 ONBOOT=yes IPADDR=10.76.249.91 GATEWAY=10.76.249.2 NETMASK=255.255.255.0
|
重命名网卡文件
# mv /etc/sysconfig/network-scripts/ifcfg-eno16777736 /etc/sysconfig/network-scripts/ifcfg-eth0 |
编辑/etc/default/grub配置文件
# vim /etc/default/grub GRUB_TIMEOUT=5 GRUB_DEFAULT=saved GRUB_DISABLE_SUBMENU=true GRUB_TERMINAL_OUTPUT="console" #GRUB_CMDLINE_LINUX="rd.lvm.lv=centos/root rd.lvm.lv=centos/swap rhgb quiet" #修改前 GRUB_CMDLINE_LINUX="net.ifnames=0 rhgb quiet" #修改后 GRUB_DISABLE_RECOVERY="true" |
为grub2生成其配置文件
# grub2-mkconfig -o /etc/grub2.cfg Generating grub configuration file ... Found linux p_w_picpath: /boot/vmlinuz-3.10.0-229.el7.x86_64 Found initrd p_w_picpath: /boot/initramfs-3.10.0-229.el7.x86_64.img Found linux p_w_picpath: /boot/vmlinuz-0-rescue-16de415bcbd643d886010c2fe954d9cb Found initrd p_w_picpath: /boot/initramfs-0-rescue-16de415bcbd643d886010c2fe954d9cb.img done
|
重启系统
验证结果
# ip addr show eth0 2: eth0: link/ether 00:0c:29:e1:c5:8a brd ff:ff:ff:ff:ff:ff inet 10.76.249.91/24 brd 10.76.249.255 scope global eth0 valid_lft forever preferred_lft forever inet6 fe80::20c:29ff:fee1:c58a/64 scope link valid_lft forever preferred_lft forever |
nmcli：网络管理命令行接口：NetworkManagerCommand-Line Interface
nmtui：网络管理文本用户接口：NetworkManager Text-User Interface
RHEL7之后的网络配置命令
[root@localhost conf.d]# nmcli --help Usage: nmcli [OPTIONS] OBJECT { COMMAND | help }
OPTIONS -t[erse] terse output -p[retty] pretty output -m[ode] tabular|multiline output mode -f[ields] -e[scape] yes|no escape columns separators in values -n[ocheck] don't check nmcli and NetworkManager versions -a[sk] ask for missing parameters -w[ait] -v[ersion] show program version -h[elp] print this help
OBJECT g[eneral] NetworkManager's general status and operations n[etworking] overall networking control r[adio] NetworkManager radio switches c[onnection] NetworkManager's connections 简写为c d[evice] devices managed by NetworkManager简写为d a[gent] NetworkManager secret agent or polkit agent |
重新加载网络配置文件
[root@localhost ~]# nmcli c reload
[root@localhost ~]# nmcli c load/etc/sysconfig/network-scripts/ifcfg-eth0
配置IP地址
[root@localhost ~]# nmcli con mod eno16777736 ipv4.addresses '192.168.1.119/24' 网卡名使用查看# nmcli con show |
配置DNS
[root@localhost ~]# nmcli con mod eno16777736 ipv4.dns '8.8.4.4' |
配置网关
[root@localhost ~]# nmcli con mod eno16777736 ipv4.gateway '192.168.1.1' |
停启用网卡
[root@localhost ~]# nmcli dev dis eth0 dis 为 disconnect [root@localhost ~]# nmcli con up eth0
|
查看相关信息
[root@localhost ~]# nmcli device status DEVICE TYPE STATE CONNECTION eth0 ethernet connected eno16777736 lo loopback unmanaged -- ；；；；；；；；；；；；；；；；；；；；；；；；；；；；；
|
nmtui 图形配置界面比较简洁
[root@localhost ~]# nmtui
我们在微信上24小时期待你的声音
解答本文疑问/技术咨询/运营咨询/技术建议/互联网交流
微信二维码
移动版官网