本篇内容介绍了“RHEL7配置ip地址的方式有哪些”的有关知识，在实际案例的操作过程中，不少人都会遇到这样的困境，接下来就让小编带领大家学习一下如何处理这些情况吧！希望大家仔细阅读，能够学有所成！

创新互联是网站建设技术企业，为成都企业提供专业的成都网站建设、成都网站设计，网站设计，网站制作，网站改版等技术服务。拥有十多年丰富建站经验和众多成功案例，为您定制适合企业的网站。十多年品质，值得信赖！

图形界面配置方法

点击桌面右上角有线连接处,选中配置ens33

在此输入ip地址，掩码，DNS，网关等

然后选中启动就ok了

如此网络配置就完成了！

通过修改配置文件

通过修改ifcfg-ens33配置文件来修改配置ip

[root@localhost ~]# vim /etc/sysconfig/network-scripts/ifcfg-ens33 
TYPE=Ethernet
PROXY_METHOD=none
BROWSER_ONLY=no
BOOTPROTO=dhcp
DEFROUTE=yes
IPV4_FAILURE_FATAL=no
IPV6INIT=yes
IPV6_AUTOCONF=yes
IPV6_DEFROUTE=yes
IPV6_FAILURE_FATAL=no
IPV6_ADDR_GEN_MODE=stable-privacy
NAME=ens33
UUID=96a5f670-6b15-4711-af6e-92aa92e1c66b
DEVICE=ens33
ONBOOT=no
~                                                                                                                                                                       
~                                                                                                                                                                       
~                                                                                                                                                                       
~                                                                                                                                                                       
~                                                                                                                                                                       
~                                                                                                                                                                       
~                                                                                                                                                                       
~                                                                                                                                                                       
~                                                                                                                                                                       
~                                                                                                                                                                       
~                                                                                                                                                                       
"/etc/sysconfig/network-scripts/ifcfg-ens33" 15L, 279C

将BOOTPROTO改为static
ONBOOT=no改为ONBOOT=yes
添加IPADDR NETMASK GATEWAY DNS1字段 如下所示：

[root@localhost ~]# cat /etc/sysconfig/network-scripts/ifcfg-ens33 
TYPE=Ethernet
PROXY_METHOD=none
BROWSER_ONLY=no
BOOTPROTO=static
DEFROUTE=yes
IPV4_FAILURE_FATAL=no
IPV6INIT=yes
IPV6_AUTOCONF=yes
IPV6_DEFROUTE=yes
IPV6_FAILURE_FATAL=no
IPV6_ADDR_GEN_MODE=stable-privacy
NAME=ens33
UUID=96a5f670-6b15-4711-af6e-92aa92e1c66b
DEVICE=ens33
ONBOOT=yes
IPADDR=172.16.1.115
NETMASK=255.255.255.0
GATEWAY=172.16.1.254
DNS1=8.8.8.8

如此重启网卡就可以了！
[root@localhost ~]# systemctl restart network

利用工具配置

输入以下 命令，指定ip 掩码

[root@localhost ~]# nmcli connection modify ens33 ipv4.method manual ipv4.address 172.16.1.120/24 connection.autoconnect yes

重启网卡

[root@localhost ~]# ifconfig
ens33: flags=4163mtu 1500
        inet 172.16.1.120  netmask 255.255.255.0  broadcast 172.16.1.255
        inet6 fe80::d09c:682a:b786:6214  prefixlen 64  scopeid 0x20
        ether 00:0c:29:65:07:1a  txqueuelen 1000  (Ethernet)
        RX packets 2536  bytes 836453 (816.8 KiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 2054  bytes 277233 (270.7 KiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
lo: flags=73mtu 65536
        inet 127.0.0.1  netmask 255.0.0.0
        inet6 ::1  prefixlen 128  scopeid 0x10loop  txqueuelen 1  (Local Loopback)
        RX packets 96  bytes 8256 (8.0 KiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 96  bytes 8256 (8.0 KiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
virbr0: flags=4099mtu 1500
        inet 192.168.122.1  netmask 255.255.255.0  broadcast 192.168.122.255
        ether 52:54:00:dc:7d:cf  txqueuelen 1000  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

“RHEL7配置ip地址的方式有哪些”的内容就介绍到这里了，感谢大家的阅读。如果想了解更多行业相关的知识可以关注创新互联-成都网站建设公司网站，小编将为大家输出更多高质量的实用文章！

网页标题：RHEL7配置ip地址的方式有哪些-创新互联
网站路径：http://kswjz.com/article/ijdii.html