以下是一次实施的全程介绍，非虚拟机环境。

1、系统环境配置介绍

1.1、操作系统规划

主机名 创新互联从2013年成立，先为惠水等服务建站，惠水等地企业，进行企业商务咨询服务。为惠水企业网站制作PC+手机+微官网三网同步一站式服务解决您的所有建站问题。	服务器配置	操作系统版本	安装数据库版本	双机软件版本
Jzzf-db1	E5-2609 v3*2 128GB内存 300G硬盘	Redhat linux 6.5 x64	Oracle 10.2.0.5	Rose ha 9.0
Jzzf-db2	E5-2609 v3*2 128GB内存 300G硬盘	Redhat linux 6.5 x64	Oracle 10.2.0.5	Rose ha 9.0

1.2、IP地址规划

主机名	IP地址	浮动IP
Jzzf-db1	Eth0:10.20.160.165 Eth2:192.168.1.1 Eth3:172.16.0.1	10.20.160.101
Jzzf-db2	Eth0:10.20.160.166 Eth2:192.168.1.2 Eth3:172.16.0.2

1.3、磁盘规划

主机名	数据磁盘	仲裁磁盘
Jzzf-db1	sdb/sdd聚合为/dev/mapper/oradata 1TB	sdc/sde聚合为/dev/mapper/vote 10GB
Jzzf-db2	sdb/sdd聚合为/dev/mapper/oradata 1TB	sdc/sde聚合为/dev/mapper/vote 10GB

2、安装ORACLE数据库软件

2.1修改主机名及HOSTS文件等

具体的修改方法我就不写了。VI编辑就行

[root@jzzf-db1 ~]# cat /etc/hosts

127.0.0.1 localhost localhost.localdomain localhost4 localhost4.localdomain4

::1 localhost localhost.localdomain localhost6 localhost6.localdomain6

10.20.160.165 jzzf-db1

10.20.160.166 jzzf-db2

[root@jzzf-db1 ~]# cat /etc/sysconfig/network

NETWORKING=yes

HOSTNAME=jzzf-db1

[root@jzzf-db1 ~]# cat /etc/redhat-release

Red Hat Enterprise Linux Server release 6.5 (Santiago) //先安装10.2.0.1，要修改该文件，修改过程见2.2

[root@jzzf-db1 ~]# uname -a

Linux localhost.localdomain 2.6.32-431.el6.x86_64 #1 SMP Sun Nov 10 22:19:54 EST 2013 x86_64 x86_64 x86_64 GNU/Linux

[root@jzzf-db1 ~]# uname -r

2.6.32-431.el6.x86_64

[root@jzzf-db2 ~]# cat /etc/hosts

127.0.0.1 localhost localhost.localdomain localhost4 localhost4.localdomain4

::1 localhost localhost.localdomain localhost6 localhost6.localdomain6

10.20.160.165 jzzf-db1

10.20.160.166 jzzf-db2

[root@jzzf-db2 ~]# cat /etc/sysconfig/network

NETWORKING=yes

HOSTNAME=jzzf-db2

[root@jzzf-db2 ~]# cat /etc/redhat-release

Red Hat Enterprise Linux Server release 6.5 (Santiago)

[root@jzzf-db2 ~]# uname -a

Linux localhost.localdomain 2.6.32-431.el6.x86_64 #1 SMP Sun Nov 10 22:19:54 EST 2013 x86_64 x86_64 x86_64 GNU/Linux

[root@jzzf-db2 ~]# uname -r

2.6.32-431.el6.x86_64

2.2、修改系统各个参数配置文件

[root@jzzf-db1 ~]# grep -v "^#" /etc/security/limits.conf

oracle soft nproc 2047

oracle hard nproc 16384

oracle soft nofile 1024

oracle hard nofile 65536

[root@jzzf-db2 ~]#grep -v "^#" /etc/security/limits.conf

oracle soft nproc 2047

oracle hard nproc 16384

oracle soft nofile 1024

oracle hard nofile 65536

[root@jzzf-db1 ~]# grep -v "^#" /etc/sysctl.conf

net.ipv4.ip_forward = 0

net.ipv4.conf.default.rp_filter = 1

net.ipv4.conf.default.accept_source_route = 0

kernel.sysrq = 0

kernel.core_uses_pid = 1

net.ipv4.tcp_syncookies = 1

net.bridge.bridge-nf-call-ip6tables = 0

net.bridge.bridge-nf-call-iptables = 0

net.bridge.bridge-nf-call-arptables = 0

kernel.msgmnb = 65536

kernel.msgmax = 65536

kernel.shmmax = 68719476736

kernel.shmall = 4294967296

kernel.shmmni = 4096

kernel.sem = 250 32000 100 128

fs.file-max = 65536

net.ipv4.ip_local_port_range = 1024 65000

net.core.rmem_default = 262144

net.core.rmem_max = 262144

net.core.wmem_default = 262144

net.core.wmem_max = 262144

[root@jzzf-db2 ~]# grep -v "^#" /etc/sysctl.conf

net.ipv4.ip_forward = 0

net.ipv4.conf.default.rp_filter = 1

net.ipv4.conf.default.accept_source_route = 0

kernel.sysrq = 0

kernel.core_uses_pid = 1

net.ipv4.tcp_syncookies = 1

net.bridge.bridge-nf-call-ip6tables = 0

net.bridge.bridge-nf-call-iptables = 0

net.bridge.bridge-nf-call-arptables = 0

kernel.msgmnb = 65536

kernel.msgmax = 65536

kernel.shmmax = 68719476736

kernel.shmall = 4294967296

kernel.shmmni = 4096

kernel.sem = 250 32000 100 128

fs.file-max = 65536

net.ipv4.ip_local_port_range = 1024 65000

net.core.rmem_default = 262144

net.core.rmem_max = 262144

net.core.wmem_default = 262144

net.core.wmem_max = 262144

[root@jzzf-db1 tmp]# cat /etc/redhat-release

Red Hat Enterprise Linux Server release 6.5 (Santiago)

[root@jzzf-db1 tmp]# cp /etc/redhat-release /tmp/

[root@jzzf-db1 tmp]# vi /etc/redhat-release

[root@jzzf-db1 tmp]# cat /etc/redhat-release

redhat-4

2.3、创建ORACLE用户及软件安装路径

groupadd -g 6000 oinstall

groupadd -g 6001 dba

useradd -g oinstall -G dba -u 601 oracle

passwd oracle

mkdir -p /u01/app/oracle/product/10.2.0/db_1

chown -R oracle:oinstall /u01/

chmod -R 775 /u01

2.4、配置yum源安装所需要的软件包

两节点都需要配置

配置YUM源

挂载操作系统光盘到mnt目录

[root@jzzf-db1 ~]#mount /dev/cdrom /mnt

[root@jzzf-db1 ~]# rpm --import /etc/pki/rpm-gpg/RPM-GPG-KEY-redhat-release

[root@jzzf-db1 ~]# cat /etc/yum.repos.d/local.repo

[DISK]

name=DISK

baseurl=file:///mnt/Server

gpgchekc=0

enable=1

安装需求包：

[root@jzzf-db1 ~]# mount -o loop /tmp/rhel-server-6.5-x86_64-dvd.iso /mnt

yum install -y libXp.i686 libXp.x86_64 libXp-devel.i686 libXp-devel.x86_64 libXpm.i686 libXpm-devel.i686 libXpm-devel.x86_64 libXpm.x86_64

yum install -y libXtst.x86_64 libXtst-devel.x86_64 libXtst.i686 libXtst-devel.i686

yum install -y binutils* compat-libstdc++-* elfutils-libelf-* elfutils-libelf-devel-* elfutils-libelf-devel-static-* gcc-* gcc-c++-* glibc-* glibc-common-* glibc-devel-* glibc-headers-* ksh libaio-* libaio-devel-* libgcc libstdc++-* libstdc++-devel make sysstat unixODBC unixODBC-devel compat-libstdc++-33.i386 compat-libstdc++-296.i386 glibc.i686 glibc-devel.i386 unixODBC.i386 unixODBC-devel.i386 libaio.i386 libaio-devel.i386 libgcc.i386 libstdc++.i386 libstdc++-devel.i386 libaio-devel.i386 libXp.i386

yum install -y binutils* compat-db setarch compat-libstdc++-* control-center elfutils-libelf-* elfutils-libelf-devel-* elfutils-libelf-devel-static-* gcc-* gcc-c++-* glibc-* glibc-common-* glibc-devel-* glibc-headers-* ksh libaio-* libaio-devel-* libgcc libstdc++-* libstdc++-devel make sysstat unixODBC unixODBC-devel compat-libstdc++-33.i386 compat-libstdc++-296.i386 glibc.i686 glibc-devel.i386 unixODBC.i386 unixODBC-devel.i386 libaio.i386 libaio-devel.i386 libgcc.i386 libstdc++.i386 libstdc++-devel.i386 libaio-devel.i386 libXp.i386

yum install binutils compat-db compat-libstdc++-33 glibc glibc-devel glibc-headers gcc gcc-c++ libstdc++ cpp make libaio ksh elfutils-libelf sysstat libaio libaio-devel setarch gcc make binutils openmotif glibc setarch libaio compat-db libXp openmotif compat-libstdc++-33-3.2.3 compat-gcc-34-c++-

cd /mnt/Packages

rpm -ivh glibc-devel-2.12-1.132.el6.i686.rpm

2.5、安装多路径，配置存储

[root@jzzf-db1 ~]# yum install device-mapper*

Loaded plugins: product-id, refresh-packagekit, security, subscription-manager

This system is not registered to Red Hat Subscription Management. You can use subscription-manager to register.

Setting up Install Process

Package device-mapper-persistent-data-0.2.8-2.el6.x86_64 already installed and latest version

Package device-mapper-event-libs-1.02.79-8.el6.x86_64 already installed and latest version

Package device-mapper-1.02.79-8.el6.x86_64 already installed and latest version

Package device-mapper-libs-1.02.79-8.el6.x86_64 already installed and latest version

Package device-mapper-event-1.02.79-8.el6.x86_64 already installed and latest version

Resolving Dependencies

--> Running transaction check

---> Package device-mapper-multipath.x86_64 0:0.4.9-72.el6 will be installed

---> Package device-mapper-multipath-libs.x86_64 0:0.4.9-72.el6 will be installed

--> Finished Dependency Resolution

Dependencies Resolved

======================================================================================================================================

Package Arch Version Repository Size

======================================================================================================================================

Installing:

device-mapper-multipath x86_64 0.4.9-72.el6 DISK 116 k

device-mapper-multipath-libs x86_64 0.4.9-72.el6 DISK 180 k

Transaction Summary

======================================================================================================================================

Install 2 Package(s)

Total download size: 297 k

Installed size: 653 k

Is this ok [y/N]: y

Downloading Packages:

--------------------------------------------------------------------------------------------------------------------------------------

Total 7.2 MB/s | 297 kB 00:00

Running rpm_check_debug

Running Transaction Test

Transaction Test Succeeded

Running Transaction

Warning: RPMDB altered outside of yum.

Installing : device-mapper-multipath-libs-0.4.9-72.el6.x86_64 1/2

Installing : device-mapper-multipath-0.4.9-72.el6.x86_64 2/2

Verifying : device-mapper-multipath-0.4.9-72.el6.x86_64 1/2

Verifying : device-mapper-multipath-libs-0.4.9-72.el6.x86_64 2/2

Installed:

device-mapper-multipath.x86_64 0:0.4.9-72.el6 device-mapper-multipath-libs.x86_64 0:0.4.9-72.el6

Complete!

配置多路径服务开机启动

[root@jzzf-db2 ~]# chkconfig --level 35 multipathd on

[root@jzzf-db2 ~]# chkconfig --list |grep multipathd

multipathd 0:off 1:off 2:off 3:on 4:off 5:on 6:off

[root@jzzf-db2 /]# /etc/init.d/multipathd start

Starting multipathd daemon: [ OK ]

[root@jzzf-db2 /]# touch /etc/multipath.conf

[root@jzzf-db2 /]# multipath -ll

2694f7863475a3844 dm-1 INSPUR,SANVDSK

size=10G features='0' hwhandler='0' wp=rw

|-+- policy='round-robin 0' prio=1 status=active

| `- 1:0:0:2 sdc 8:32 active ready running

`-+- policy='round-robin 0' prio=1 status=enabled

`- 2:0:0:2 sde 8:64 active ready running

270746443556c555a dm-0 INSPUR,SANVDSK

size=1.0T features='0' hwhandler='0' wp=rw

|-+- policy='round-robin 0' prio=1 status=active

| `- 1:0:0:1 sdb 8:16 active ready running

`-+- policy='round-robin 0' prio=1 status=enabled

`- 2:0:0:1 sdd 8:48 active ready running

[root@jzzf-db2 /]# grep -v "^#" /etc/multipath.conf

blacklist {

devnode "^sda"

}

defaults {

user_friendly_names yes

}

multipaths {

multipath {

wwid 2694f7863475a3844

alias vote

path_grouping_policy multibus

path_selector "round-robin 0"

failback manual

rr_weight priorities

no_path_retry 5

}

multipath {

wwid 270746443556c555a

alias oradata

path_grouping_policy multibus

path_selector "round-robin 0"

failback manual

rr_weight priorities

no_path_retry 5

}

}

[root@jzzf-db2 /]# /etc/init.d/multipathd restart

[root@jzzf-db2 /]# multipath -F

[root@jzzf-db2 /]# multipath -v2

create: oradata (270746443556c555a) undef INSPUR,SANVDSK

size=1.0T features='0' hwhandler='0' wp=undef

`-+- policy='round-robin 0' prio=1 status=undef

|- 1:0:0:1 sdb 8:16 undef ready running

`- 2:0:0:1 sdd 8:48 undef ready running

create: vote (2694f7863475a3844) undef INSPUR,SANVDSK

size=10G features='0' hwhandler='0' wp=undef

`-+- policy='round-robin 0' prio=1 status=undef

|- 1:0:0:2 sdc 8:32 undef ready running

`- 2:0:0:2 sde 8:64 undef ready running

[root@jzzf-db2 /]# multipath -ll

oradata (270746443556c555a) dm-0 INSPUR,SANVDSK

size=1.0T features='1 queue_if_no_path' hwhandler='0' wp=rw

`-+- policy='round-robin 0' prio=1 status=active

|- 1:0:0:1 sdb 8:16 active ready running

`- 2:0:0:1 sdd 8:48 active ready running

vote (2694f7863475a3844) dm-1 INSPUR,SANVDSK

size=10G features='1 queue_if_no_path' hwhandler='0' wp=rw

`-+- policy='round-robin 0' prio=1 status=active

|- 1:0:0:2 sdc 8:32 active ready running

`- 2:0:0:2 sde 8:64 active ready running

[root@jzzf-db2 mapper]# pwd

/dev/mapper

[root@jzzf-db2 mapper]# ls

control oradata vote

[root@jzzf-db1 mapper]# fdisk /dev/mapper/oradata

Device contains neither a valid DOS partition table, nor Sun, SGI or OSF disklabel

Building a new DOS disklabel with disk identifier 0x181ae45d.

Changes will remain in memory only, until you decide to write them.

After that, of course, the previous content won't be recoverable.

Warning: invalid flag 0x0000 of partition table 4 will be corrected by w(rite)

The device presents a logical sector size that is smaller than

the physical sector size. Aligning to a physical sector (or optimal

I/O) size boundary is recommended, or performance may be impacted.

WARNING: DOS-compatible mode is deprecated. It's strongly recommended to

switch off the mode (command 'c') and change display units to

sectors (command 'u').

Command (m for help): n

Command action

e extended

p primary partition (1-4)

p

Partition number (1-4): 1

First cylinder (1-133674, default 1):

Using default value 1

Last cylinder, +cylinders or +size{K,M,G} (1-133674, default 133674):

Using default value 133674

Command (m for help): p

Disk /dev/mapper/oradata: 1099.5 GB, 1099511627776 bytes

255 heads, 63 sectors/track, 133674 cylinders

Units = cylinders of 16065 * 512 = 8225280 bytes

Sector size (logical/physical): 512 bytes / 4096 bytes

I/O size (minimum/optimal): 4096 bytes / 524288 bytes

Disk identifier: 0x181ae45d

Device Boot Start End Blocks Id System

/dev/mapper/oradatap1 1 133674 1073736373+ 83 Linux

Partition 1 does not start on physical sector boundary.

Command (m for help): w

The partition table has been altered!

Calling ioctl() to re-read partition table.

WARNING: Re-reading the partition table failed with error 22: Invalid argument.

The kernel still uses the old table. The new table will be used at

the next reboot or after you run partprobe(8) or kpartx(8)

Syncing disks.

创建完分区后，可能需要重启才能识别出/dev/mapper/oradatap1文件

[root@jzzf-db1 mapper]# mkfs.ext4 /dev/mapper/oradatap1

mke2fs 1.41.12 (17-May-2010)

/dev/mapper/oradatap1 alignment is offset by 512 bytes.

This may result in very poor performance, (re)-partitioning suggested.

Filesystem label=

OS type: Linux

Block size=4096 (log=2)

Fragment size=4096 (log=2)

Stride=1 blocks, Stripe  blocks

67108864 inodes, 268434093 blocks

13421704 blocks (5.00%) reserved for the super user

First data block=0

Maximum filesystem blocks=4294967296

8192 block groups

32768 blocks per group, 32768 fragments per group

8192 inodes per group

Superblock backups stored on blocks:

32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208,

4096000, 7962624, 11239424, 20480000, 23887872, 71663616, 78675968,

102400000, 214990848

Writing inode tables: done

Creating journal (32768 blocks): done

Writing superblocks and filesystem accounting information:

Message from syslogd@jzzf-db1 at May 12 14:04:00 ...

kernel:BUG: soft lockup - CPU#6 stuck for 67s! [mkfs.ext4:11569]

done

This filesystem will be automatically checked every 21 mounts or

180 days, whichever comes first. Use tune2fs -c or -i to override.

[root@jzzf-db1 mapper]# mkdir /oradata

[root@jzzf-db1 mapper]# chown -R oracle:dba /oradata/

[root@jzzf-db1 mapper]# chmod -R 775 /oradata/

[root@jzzf-db1 mapper]# mount /dev/mapper/oradatap1 /oradata/

[root@jzzf-db1 mapper]# chown -R oracle:dba /oradata/

[root@jzzf-db1 mapper]# chmod -R 775 /oradata/

2.6、安装ORACLE及升级版本

1、配置ORACLE环境变量，修改/home/oracle/.bash_profile增加以下内容

export ORACLE_BASE=/u01/app/oracle

export ORACLE_HOME=$ORACLE_BASE/product/10.2.0/db_1

export ORACLE_SID=orcl

export PATH=$PATH:$ORACLE_HOME/bin

2、执行 . .bash_profile 生效配置

3、切换到ORACLE用户，su – oracle 然后进入到ORACLE10.2.01的安装目录，执行安装

 

此处如出现如下提示，直接continue继续即可，等安装补丁的时候会解决。

4、执行完脚本安装完毕后，使用ROOT用户替换之前修改过的redhat-release文件

cp /tmp/redhat-release /etc/

再进入到10.2.0.5的安装目录，使用ORACLE用户安装补丁

5、都安装完毕后，执行DBCA创建数据库实例。

所有文件都要放到共享存储/oradata目录下。

3、安装并配置ROSE HA双机

3.1、安装ROSE HA 9.0

[root@jzzf-db1 RoseHA-9.0.0-9009-RHEL6-x86_64]# ls

install resource.tar

[root@jzzf-db1 RoseHA-9.0.0-9009-RHEL6-x86_64]# ./install

RoseHA Installation

-----------------------------------

Version: 9.0.0 (buildno:9009)

1. Cluster Engine

2. Cluster Manager(hcc)

3. Cluster Command Line Interface(hcli)

4. Cluster User Interface for Text Window(hcuiw)

5. ALL

Q. Quit

Choose model(s,compart with space) you want to Install[1-4,5(def),Q]:5

you select 5:

5. ALL

Are you sure?[y,n(def)]:y

Please specify the path to install, [/opt/(def)]:

insatll...OK

Starting clusterd service: [ OK ]

Starting monitord service: [ OK ]

Starting hclid service: [ OK ]

[root@jzzf-db1 RoseHA-9.0.0-9009-RHEL6-x86_64]#

3.2、测试ROSE HA脚本

替换ORACLE里的TNSNAME文件及LISNTENER文件（红色斜体字根据实际情况修改）

TNSNAME.ORA文件替换成如下内容：

# tnsnames.ora Network Configuration File: /u01/app/oracle/product/10.2.0/db_1/network/admin/tnsnames.ora

# Generated by Oracle configuration tools.

EXTPROC_CONNECTION_DATA =

(DESCRIPTION =

(ADDRESS_LIST =

(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC0))

)

(CONNECT_DATA =

(SID = PLSExtProc)

(PRESENTATION = RO)

)

)

ORA_BC =

(DESCRIPTION =

(ADDRESS_LIST =

(ADDRESS = (PROTOCOL = TCP)(HOST = 10.20.160.101)(PORT = 1521))

)

(CONNECT_DATA =

(SERVICE_NAME = ora_bc)

)

)

listener.ora文件替换成如下内容：

# listener.ora Network Configuration File: /u01/app/oracle/product/10.2.0/db_1/network/admin/listener.ora

# Generated by Oracle configuration tools.

SID_LIST_LISTENER =

(SID_LIST =

(SID_DESC =

(SID_NAME = PLSExtProc)

(ORACLE_HOME = /u01/app/oracle/product/10.2.0/db_1)

(PROGRAM = extproc)

)

)

LISTENER =

(DESCRIPTION_LIST =

(DESCRIPTION =

(ADDRESS = (PROTOCOL = TCP)(HOST = 10.20.160.101)(PORT = 1521))

(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC0))

)

)

#static-set

SID_LIST_LISTENER =

(SID_LIST =

(SID_DESC =

(GLOBAL_DBNAME = ora_bc)

(ORACLE_HOME = /u01/app/oracle/product/10.2.0/db_1)

(SID_NAME = ora_bc)

)

)

1、手动mount文件系统到/oradata目录

Mount /dev/mapper/oradatap1 /oradata

2、手动加载子IP

ifconfig eth0:1 10.20.160.101 up

3、进入到ROSE HA目录/opt/Rose/Cluster/bin/

执行./ora_start.sh <实例名> LISTENER <服务名>

查看是否可以正常启动ORACLE实例及监听，如成功通过检查

4、进入到ROSE HA目录/opt/Rose/Cluster/bin/

执行./ag_oracle.bin <实例名> <服务名> 0

查看返回结果是否成功，如成功通过检查

5、进入到ROSE HA目录/opt/Rose/Cluster/bin/

执行./ora_stop.sh <实例名> LISTENER <服务名>

查看是否可以停止ORACLE实例及监听，如成功通过检查

3.3、配置ROSE HA数据库集群

Ceate cluster

 

欢迎拍砖！

网站题目：实战~REDHAT6.5X64上安装ORACLE双机（ROSE-HA9.0）
网站链接：http://kswjz.com/article/ggpojp.html