扫二维码与项目经理沟通
我们在微信上24小时期待你的声音
解答本文疑问/技术咨询/运营咨询/技术建议/互联网交流
下文给大家带来Centos 7部署Nginx网站服务、内网客户端、Haproxy云服务器等详情，希望能够给大家在实际运用中带来一定的帮助，负载均衡涉及的东西比较多，理论也不多，网上有很多书籍，今天我们就用创新互联在行业内累计的经验来做一个解答。
成都创新互联公司是一家专业提供平桥企业网站建设,专注与成都网站设计、成都做网站、H5技术、小程序制作等业务。10年已为平桥众多企业、政府机构等服务。创新互联专业的建站公司优惠进行中。
关于Nginx的原理概述及详细配置请参考博文：Centos 7部署Nginx网站服务
[root@centos01 ~]# yum -y install prce-devel zlib-devel
[root@centos01 ~]# useradd -M -s /sbin/nologin nginx
[root@centos01 ~]# umount /mnt/
mount: /dev/sr0 写保护，将以只读方式挂载
[root@centos01 ~]# scp /mnt/nginx-1.6.0.tar.gz root@192.168.100.20:/root
The authenticity of host '192.168.100.20 (192.168.100.20)' can't be established.
ECDSA key fingerprint is SHA256:PUueT9fU9QbsyNB5NC5hbSXzaWxxQavBxXmfoknXl4I.
ECDSA key fingerprint is MD5:6d:f7:95:0e:51:1a:d8:9e:7b:b6:3f:58:51:51:4b:3b.
Are you sure you want to continue connecting (yes/no)? yes
Warning: Permanently added '192.168.100.20' (ECDSA) to the list of known hosts.
root@192.168.100.20's password:
nginx-1.6.0.tar.gz 100% 784KB 68.2MB/s 00:00
[root@centos01 ~]# scp /mnt/haproxy-1.4.24.tar.gz root@192.168.100.30:/root
The authenticity of host '192.168.100.30 (192.168.100.30)' can't be established.
ECDSA key fingerprint is SHA256:PUueT9fU9QbsyNB5NC5hbSXzaWxxQavBxXmfoknXl4I.
ECDSA key fingerprint is MD5:6d:f7:95:0e:51:1a:d8:9e:7b:b6:3f:58:51:51:4b:3b.
Are you sure you want to continue connecting (yes/no)? yes
Warning: Permanently added '192.168.100.30' (ECDSA) to the list of known hosts.
root@192.168.100.30's password:
haproxy-1.4.24.tar.gz 100% 817KB 31.1MB/s 00:00 00:00
[root@centos01 ~]# tar zxvf /mnt/nginx-1.6.0.tar.gz -C /usr/src/
[root@centos01 ~]# cd /usr/src/nginx-1.6.0/
[root@centos01 nginx-1.6.0]# ./configure --prefix=/usr/local/nginx --user=nginx
[root@centos01 nginx-1.6.0]# make && make install
[root@centos01 ~]# ln -s /usr/local/nginx/sbin/* /usr/local/sbin/
[root@centos01 ~]# echo "192.168.100.10:nginx" > /usr/local/nginx/html/index.html
[root@centos01 ~]# nginx
[root@centos01 ~]# netstat -anptu | grep nginx
tcp 0 0 0.0.0.0:80 0.0.0.0:* LISTEN 3685/ngin: master [root@centos02 ~]# yum -y install pcre-devel zlib-devel
[root@centos02 ~]# ls
anaconda-ks.cfg initial-setup-ks.cfg nginx-1.6.0.tar.gz
[root@centos02 ~]# tar zxvf nginx-1.6.0.tar.gz -C /usr/src/
[root@centos02 ~]# useradd -M -s /sbin/nologin nginx
[root@centos02 ~]# cd /usr/src/nginx-1.6.0/
[root@centos02 nginx-1.6.0]# ./configure --prefix=/usr/local/nginx --user=nginx
[root@centos02 nginx-1.6.0]# make && make install
[root@centos02 ~]# ln -s /usr/local/nginx/sbin/* /usr/local/sbin/
[root@centos02 ~]# echo "192.168.100.20:nginx" > /usr/local/nginx/html/index.html
[root@centos02 ~]# nginx
[root@centos02 ~]# netstat -anptu | grep nginx
tcp 0 0 0.0.0.0:80 0.0.0.0:* LISTEN 6059/ngin: master 
Haproxy概述及工作原理详细配置参考博文：Haproxy搭建Web群集概述
Centos 7基于Haproxy搭建高可用Web群集
[root@centos03 ~]# yum -y install pcre-devel bzip2-devel
[root@centos03 ~]# ls
anaconda-ks.cfg haproxy-1.4.24.tar.gz initial-setup-ks.cfg
[root@centos03 ~]# tar zxvf haproxy-1.4.24.tar.gz -C /usr/src/
[root@centos03 ~]# cd /usr/src/haproxy-1.4.24/
[root@centos03 haproxy-1.4.24]# make TARGET=linux26
[root@centos03 haproxy-1.4.24]# make install [root@centos03 ~]# mkdir /etc/haproxy
[root@centos03 ~]# cp /usr/src/haproxy-1.4.24/examples/haproxy.cfg /etc/haproxy/
[root@centos03 ~]# cp /usr/src/haproxy-1.4.24/examples/haproxy.init /etc/init.d/haproxy
[root@centos03 ~]# chmod +x /etc/init.d/haproxy
[root@centos03 ~]# chkconfig --add haproxy
[root@centos03 ~]# chkconfig --level 35 haproxy on
[root@centos03 ~]# cp /usr/src/haproxy-1.4.24/haproxy /usr/sbin/
[root@centos03 ~]# mkdir -p /usr/share/haproxy [root@centos03 ~]# vim /etc/haproxy/haproxy.cfg
listen nginx 192.168.100.30:80
balance roundrobin
server web01 192.168.100.10:80 check inter 2000 fall 3
server web02 192.168.100.20:80 check inter 2000 fall 3
[root@centos03 ~]# /etc/init.d/haproxy start
Starting haproxy (via systemctl): [ 确定 ]
关于Firewalld防火墙的概述及详细配置请参考博文：Centos 7的Firewalld防火墙基础
Centos 7的firewalld防火墙地址伪装和端口转发原理
centos 7之firewalld防火墙配置IP伪装和端口转发案例详解
[root@centos04 ~]# cp /etc/sysconfig/network-scripts/ifcfg-ens32 /etc/sysconfig/network-scripts/ifcfg-ens34
[root@centos04 ~]# vim /etc/sysconfig/network-scripts/ifcfg-ens34
TYPE=Ethernet
PROXY_METHOD=none
BROWSER_ONLY=no
BOOTPROTO=static
DEFROUTE=yes
NAME=ens34
DEVICE=ens34
ONBOOT=yes
IPADDR=192.168.200.254
NATEMASK=255.255.255.0
DNS1=192.168.200.254
[root@centos04 ~]# systemctl restart network
[root@centos04 ~]# vim /etc/sysctl.conf
net.ipv4.ip_forward = 1
[root@centos04 ~]# sysctl -p
[root@centos01 ~]# vim /etc/sysconfig/network-scripts/ifcfg-ens32
GATEWAY=192.168.100.40
[root@centos01 ~]# systemctl restart network
[root@centos04 ~]# systemctl start firewalld.service
[root@centos04 ~]# systemctl enable firewalld.service
[root@centos04 ~]# firewall-cmd --add-interface=ens34 --zone=external
The interface is under control of NetworkManager, setting zone to 'external'.
success
[root@centos04 ~]# firewall-cmd --add-interface=ens32 --zone=trusted
The interface is under control of NetworkManager, setting zone to 'trusted'.
success
[root@centos04 ~]# firewall-cmd --get-active-zones
external
interfaces: ens34
trusted
interfaces: ens32
[root@centos04 ~]# firewall-cmd --remove-masquerade --zone=external
success
[root@centos04 ~]# firewall-cmd --add-rich-rule='rule family=ipv4 source address=192.168.100.0/24 masquerade'
success
[root@centos04 ~]# firewall-cmd --add-rich-rule='rule family=ipv4 destination address=192.168.200.254/32 forward-port port=80 protocol=tcp to-addr=192.168.100.30'
success
[root@centos04 ~]# firewall-cmd --zone=external --add-service=http
success
[root@centos04 ~]# firewall-cmd --zone=external --add-service=dns
success
[root@centos04 ~]# firewall-cmd --zone=external --list-all
external (active)
target: default
icmp-block-inversion: no
interfaces: ens34
sources:
services: ssh http dns
ports:
protocols:
masquerade: no
forward-ports:
source-ports:
icmp-blocks:
rich rules:
rule family="ipv4" source address="192.168.100.0/24" masquerade
rule family="ipv4" destination address="192.168.200.254/32" forward-port port="80" protocol="tcp" to-addr="192.168.100.30"关于DNS详细配置及概述请参考博文：CentOS7简单搭建DNS服务
[root@centos04 ~]# yum -y install bind bind-chroot bind-utils
[root@centos04 ~]# echo "" > /etc/named.conf
[root@centos04 ~]# vim /etc/named.conf
options {
listen-on port 53 { any; };
directory "/var/named";
};
zone benet.com IN {
type master;
file "benet.com.zone";
};
[root@centos04 ~]# named-checkconf -z /etc/named.conf
[root@centos04 ~]# vim /var/named/benet.com.zone
$TTL 86400
@ SOA benet.com. root.benet.com.(
2020021801
1H
15M
1W
1D
)
@ NS centos04.benet.com.
centos04 A 192.168.200.254
www A 192.168.200.254
[root@centos04 ~]# named-checkzone benet.com /var/named/benet.com.zone
zone benet.com/IN: loaded serial 2020021801
OK
[root@centos04 ~]# chmod +x /var/named/benet.com.zone
[root@centos04 ~]# chown named:named /var/named/benet.com.zone
[root@centos04 ~]# systemctl start named
[root@centos04 ~]# systemctl enable named 1、客户端配置IP地址、添加DNS地址
2、客户端使用域名访问
3、客户端更换IP地址重新访问
看了以上关于Centos 7部署Nginx网站服务、内网客户端、Haproxy服务器等详情，如果大家还有什么地方需要了解的可以在创新互联行业资讯里查找自己感兴趣的或者找我们的专业技术工程师解答的，创新互联技术工程师在行业内拥有十几年的经验了。
我们在微信上24小时期待你的声音
解答本文疑问/技术咨询/运营咨询/技术建议/互联网交流
微信二维码
移动版官网