扫二维码与项目经理沟通
我们在微信上24小时期待你的声音
解答本文疑问/技术咨询/运营咨询/技术建议/互联网交流
你的网络流没有实例化，在As 后面加个new 就行了
在焉耆等地区，都构建了全面的区域性战略布局，加强发展的系统性、市场前瞻性、产品创新能力，以专注、极致的服务理念，为客户提供网站制作、做网站 网站设计制作按需搭建网站,公司网站建设,企业网站建设,成都品牌网站建设,全网整合营销推广,成都外贸网站制作,焉耆网站建设费用合理。
Dim networkStream as new Network…………
'补模块3文件。一个放不下。
'
' 渲染子程序，将新的帧数据渲染到 lpDIBitsRender 中
' 算法：
' posx = Wave1(x-1,y)-Wave1(x+1,y)+x
' posy = Wave1(x,y-1)-Wave1(x,y+1)+y
' SourceBmp(x,y) = DestBmp(posx,posy)
'
Public Sub WaveRender(lpWaveObject As WAVE_OBJECT)
Dim dwPosX As Long, dwPosY As Long, dwPtrSource As Long, dwPtrDest As Long, dwFlag As Long
Dim lpWave1 As Long, LineIdx As Long, LinePtr As Long
Dim lpDIBitsSource As Long, lpDIBitsRender As Long
Dim I As Long, J As Long
dwFlag = 0
With lpWaveObject
'Debug.Print "WaveRender " .dwFlag
If (.dwFlag And F_WO_ACTIVE) = 0 Then Exit Sub
.dwFlag = .dwFlag Or F_WO_NEED_UPDATE
lpWave1 = .lpWave1
LineIdx = .dwWaveByteWidth '像素指针
For I = 1 To .dwBmpHeight - 2
For J = 0 To .dwBmpWidth - 1
'********************************************************************
' PosY=i+像素上1能量-像素下1能量
' PosX=j+像素左1能量-像素右1能量
'********************************************************************
'LineIdx = LineIdx - .dwWaveByteWidth
LinePtr = lpWave1 + LineIdx - .dwWaveByteWidth
pLongPtr(0) = LinePtr
dwPosY = pLong(0)
LinePtr = lpWave1 + LineIdx + .dwWaveByteWidth
pLongPtr(0) = LinePtr
dwPosY = dwPosY - pLong(0) + I
LinePtr = lpWave1 + LineIdx - 4
pLongPtr(0) = LinePtr
dwPosX = pLong(0)
LinePtr = lpWave1 + LineIdx + 4
pLongPtr(0) = LinePtr
dwPosX = dwPosX - pLong(0) + J
If dwPosX 0 Or dwPosY 0 Then GoTo Continue
If dwPosX = .dwBmpWidth Or dwPosY = .dwBmpHeight Then GoTo Continue
'********************************************************************
' ptrSource = dwPosY * dwDIByteWidth + dwPosX * 3
' ptrDest = i * dwDIByteWidth + j * 3
'********************************************************************
'dwPtrSource = dwPosY * .dwDIByteWidth + (dwPosX + dwPosX * 2)
dwPosX = dwPosX + dwPosX * 2 'dwPosX * 3
dwPtrSource = dwPosY * .dwDIByteWidth + dwPosX
dwPtrDest = I * .dwDIByteWidth + (J + J * 2) 'dwPtrDest = I * .dwDIByteWidth + J * 3
'********************************************************************
' 渲染像素 [ptrDest] = 原始像素 [ptrSource]
'********************************************************************
lpDIBitsSource = .lpDIBitsSource + dwPtrSource
lpDIBitsRender = .lpDIBitsRender + dwPtrDest
If dwPtrSource dwPtrDest Then
dwFlag = dwFlag Or 1 '如果存在源像素和目标像素不同，则表示还在活动状态
' Debug.Print dwPtrSource " SR " dwPtrDest
'CopyMemory ByVal lpDIBitsRender, ByVal lpDIBitsSource, 3
Call WaveGetPixel(lpDIBitsSource, lpDIBitsRender, .dwDIByteWidth)
Else
CopyMemory ByVal lpDIBitsRender, ByVal lpDIBitsSource, 3
End If
'********************************************************************
' 继续循环
'********************************************************************
Continue:
LineIdx = LineIdx + 4 '像素++ '指针4个字节
Next 'J
Next 'I
SetDIBits .hDcRender, .hBmpRender, 0, .dwBmpHeight, .lpDIBitsRender, .stBmpInfo, DIB_RGB_COLORS
If dwFlag = 0 Then .dwFlag = .dwFlag And (Not F_WO_ACTIVE)
'Debug.Print "WaveRender " .dwFlag
End With
End Sub
Public Sub WaveUpdateFrame(lpWaveObject As WAVE_OBJECT, ByVal hdc As Long, bIfForce As Boolean)
'Dim ret As Long
With lpWaveObject
If bIfForce = True Then GoTo labUpdate
If (.dwFlag And F_WO_NEED_UPDATE) Then
'ret = SetDIBitsToDevice(.hDcRender, 0, 0, .dwBmpWidth, .dwBmpHeight, 0, 0, 0, .dwBmpHeight, .lpDIBitsRender, .stBmpInfo, DIB_RGB_COLORS)
'ret = SetDIBits(.hDcRender, .hBmpRender, 0, .dwBmpHeight, .lpDIBitsRender, .stBmpInfo, DIB_RGB_COLORS)
'SetDIBits .hDcRender, .hBmpRender, 0, .dwBmpHeight, .lpDIBitsRender, .stBmpInfo, DIB_RGB_COLORS
labUpdate:
BitBlt hdc, 0, 0, .dwBmpWidth, .dwBmpHeight, .hDcRender, 0, 0, SRCCOPY
.dwFlag = .dwFlag And (Not F_WO_NEED_UPDATE)
End If
End With
End Sub
'
' 扔一块石头
'
Public Sub WaveDropStone(lpWaveObject As WAVE_OBJECT, ByVal dwPosX As Long, ByVal dwPosY As Long, ByVal dwStoneSize As Long, ByVal dwStoneWeight As Long)
Dim dwSize As Long
Dim dwX1 As Long, dwX2 As Long
Dim dwY1 As Long, dwY2 As Long, dwY3 As Long
'Dim dwMaxX As Long, dwMaxY As Long
Dim LinePtr As Long
With lpWaveObject
'Debug.Print "WaveDropStone " .dwFlag
'********************************************************************
' 计算范围
'********************************************************************
dwSize = dwStoneSize \ H2 '2 ^ 1
dwX1 = dwPosX + dwSize
dwX2 = dwPosX - dwSize
If (.dwFlag And F_WO_ELLIPSE) Then dwSize = dwSize \ H2 ' 2 ^ 1
dwY1 = dwPosY + dwSize
dwY2 = dwPosY - dwSize
dwSize = dwStoneSize
If dwSize = 0 Then dwSize = dwSize + 1
'********************************************************************
' 判断范围的合法性
'********************************************************************
If dwX1 + 1 = .dwBmpWidth Or dwX2 1 Or dwY1 + 1 = .dwBmpHeight Or dwY2 1 Then Exit Sub
'********************************************************************
' 将范围内的点的能量置为 dwStoneWeight
'********************************************************************
While dwX2 = dwX1
dwY3 = dwY2
While dwY3 = dwY1
'(x-x0)^2+(y-y0)^2=r^2 就在圆内
If (dwX2 - dwPosX) * (dwX2 - dwPosX) + (dwY3 - dwPosY) * (dwY3 - dwPosY) = dwSize * dwSize Then
LinePtr = .lpWave1 + (dwY3 * .dwBmpWidth + dwX2) * H4 '2 ^ 2
pLongPtr(0) = LinePtr
pLong(0) = dwStoneWeight
End If
dwY3 = dwY3 + 1
Wend
dwX2 = dwX2 + 1
Wend
.dwFlag = .dwFlag Or F_WO_ACTIVE
End With
End Sub
'
' 计算扩散数据、渲染位图、更新窗口、处理特效的定时器过程
'
Public Sub WaveTimerProc(ByVal hWnd As Long, ByVal uMsg As Long, ByVal idEvent As Long, ByVal dwTime As Long)
Dim hdc As Long
Dim dwPosX As Long, dwPosY As Long, dwSize As Long, dwWeight As Long
Dim lpWaveObj As Long
'建立模拟指针
Dim pWAVE_OBJECT() As WAVE_OBJECT
Dim pWAVE_OBJECTPtr() As Long
Dim SApWAVE_OBJECT As SAFEARRAY1D
Dim SApWAVE_OBJECTPtr As SAFEARRAY1D
With SApWAVE_OBJECT
.cDims = 1
.fFeatures = 0
.cbElements = 1
.cLocks = 0
.pvData = 0
.Bounds(0).lLbound = 0
.Bounds(0).cElements = 1
End With
With SApWAVE_OBJECTPtr
.cDims = 1
.fFeatures = 0
.cbElements = 4
.cLocks = 0
.pvData = VarPtr(SApWAVE_OBJECT.pvData)
.Bounds(0).lLbound = 0
.Bounds(0).cElements = 1
End With
CopyMemory ByVal VarPtrArray(pWAVE_OBJECT), VarPtr(SApWAVE_OBJECT), 4
CopyMemory ByVal VarPtrArray(pWAVE_OBJECTPtr), VarPtr(SApWAVE_OBJECTPtr), 4
lpWaveObj = idEvent
pWAVE_OBJECTPtr(0) = lpWaveObj
'Debug.Print "WaveTimerProc " pWAVE_OBJECT(0).dwFlag
Call WaveSpread(pWAVE_OBJECT(0))
Call WaveRender(pWAVE_OBJECT(0))
With pWAVE_OBJECT(0)
If (.dwFlag And F_WO_NEED_UPDATE) Then
hdc = GetDC(.hWnd)
Call WaveUpdateFrame(pWAVE_OBJECT(0), hdc, False)
Call ReleaseDC(.hWnd, hdc)
End If
'********************************************************************
' 特效处理
'********************************************************************
If (.dwFlag And F_WO_EFFECT) = 0 Then Exit Sub
Select Case .dwEffectType
'********************************************************************
' Type = 1 雨点，Param1＝速度（0最快，越大越慢），Param2＝雨点大小，Param3＝能量
'********************************************************************
Case 1
'Dim ret As Long
If .dwEffectParam1 0 Then Call WaveRandom(pWAVE_OBJECT(0), .dwEffectParam1) 'ret = WaveRandom(pWAVE_OBJECT(0), .dwEffectParam1)
'If ret = 0 Then
dwPosX = WaveRandom(pWAVE_OBJECT(0), .dwBmpWidth - 2) + 1
dwPosY = WaveRandom(pWAVE_OBJECT(0), .dwBmpHeight - 2) + 1
dwSize = WaveRandom(pWAVE_OBJECT(0), .dwEffectParam2) + 1
dwWeight = WaveRandom(pWAVE_OBJECT(0), .dwEffectParam3) + 50
Call WaveDropStone(pWAVE_OBJECT(0), dwPosX, dwPosY, dwSize, dwWeight)
'End If
'********************************************************************
' Type = 2 行船，Param1＝速度（0最快，越大越快），Param2＝大小，Param3＝能量
'********************************************************************
Case 2
.dwEff2Flip = .dwEff2Flip + 1
If (.dwEff2Flip And 1) 0 Then Exit Sub
dwPosX = .dwEff2X + .dwEff2XAdd
dwPosY = .dwEff2Y + .dwEff2YAdd
If dwPosX 1 Then
dwPosX = -(dwPosX - 1)
.dwEff2XAdd = -.dwEff2XAdd
End If
If dwPosY 1 Then
dwPosY = -(dwPosY - 1)
.dwEff2YAdd = -.dwEff2YAdd
End If
If dwPosX .dwBmpWidth - 1 Then
dwPosX = (.dwBmpWidth - 1) - (dwPosX - (.dwBmpWidth - 1)) '(.dwBmpWidth - 1)*2 -dwPosX
.dwEff2XAdd = -.dwEff2XAdd
End If
If dwPosY .dwBmpHeight - 1 Then
dwPosY = (.dwBmpHeight - 1) - (dwPosY - (.dwBmpHeight - 1)) '(.dwBmpHeight-1)*2-dwPosY
.dwEff2YAdd = -.dwEff2YAdd
End If
.dwEff2X = dwPosX
.dwEff2Y = dwPosY
Call WaveDropStone(pWAVE_OBJECT(0), dwPosX, dwPosY, .dwEffectParam2, .dwEffectParam3)
'********************************************************************
' Type = 3 波浪，Param1＝密度，Param2＝大小，Param3＝能量
'********************************************************************
Case 3
Dim I As Long
For I = 0 To .dwEffectParam1
dwPosX = WaveRandom(pWAVE_OBJECT(0), .dwBmpWidth - 2) + 1
dwPosY = WaveRandom(pWAVE_OBJECT(0), .dwBmpHeight - 2) + 1
dwSize = WaveRandom(pWAVE_OBJECT(0), .dwEffectParam2) + 1
dwWeight = WaveRandom(pWAVE_OBJECT(0), .dwEffectParam3)
Call WaveDropStone(pWAVE_OBJECT(0), dwPosX, dwPosY, dwSize, dwWeight)
Next
End Select
End With
'取消模拟指针
CopyMemory ByVal VarPtrArray(pWAVE_OBJECT), 0, 4
CopyMemory ByVal VarPtrArray(pWAVE_OBJECTPtr), 0, 4
End Sub
'
'释放对象
'
Public Sub WaveFree(lpWaveObject As WAVE_OBJECT)
With lpWaveObject
If .hDcRender 0 Then DeleteDC (.hDcRender)
If .hBmpRender 0 Then DeleteObject .hBmpRender
If .lpDIBitsSource 0 Then GlobalFree .lpDIBitsSource
If .lpDIBitsRender 0 Then GlobalFree .lpDIBitsRender
If .lpWave1 0 Then GlobalFree .lpWave1
If .lpWave2 0 Then GlobalFree .lpWave2
KillTimer .hWnd, VarPtr(lpWaveObject)
ZeroMemory ByVal VarPtr(lpWaveObject), Len(lpWaveObject)
'-----------------------------------------------------------
'取消模拟指针
CopyMemory ByVal VarPtrArray(pLong), 0, 4
CopyMemory ByVal VarPtrArray(pLongPtr), 0, 4
'-----------------------------------------------------------------
'取消模拟指针
CopyMemory ByVal VarPtrArray(pByte), 0, 4
CopyMemory ByVal VarPtrArray(pBytePtr), 0, 4
'-----------------------------------------------------------
End With
End Sub
'
' 初始化对象
' 参数：_lpWaveObject ＝ 指向 WAVE_OBJECT结构体
' 返回：0 成功、 1 失败
'
Public Function WaveInit(lpWaveObject As WAVE_OBJECT, ByVal hWnd As Long, ByVal hBmp As Long, ByVal dwSpeed As Long, ByVal dwType As WaveType) As Long
Dim stBmp As BITMAP
Dim dwReturn As Long
Dim ret As Long
Dim hdc As Long
Dim hMDC As Long
'-----------------------------------------------------------------
'建立模拟指针
With SApLong
.cDims = 1
.fFeatures = 0
.cbElements = 1
.cLocks = 0
.pvData = 0
.Bounds(0).lLbound = 0
.Bounds(0).cElements = 1
End With
With SApLongPtr
.cDims = 1
.fFeatures = 0
.cbElements = 4
.cLocks = 0
.pvData = VarPtr(SApLong.pvData)
.Bounds(0).lLbound = 0
.Bounds(0).cElements = 1
End With
CopyMemory ByVal VarPtrArray(pLong), VarPtr(SApLong), 4
CopyMemory ByVal VarPtrArray(pLongPtr), VarPtr(SApLongPtr), 4
'-----------------------------------------------------------------
'建立模拟指针
With SApByte
.cDims = 1
.fFeatures = 0
.cbElements = 1
.cLocks = 0
.pvData = 0
.Bounds(0).lLbound = 0
.Bounds(0).cElements = 3
End With
With SApBytePtr
.cDims = 1
.fFeatures = 0
.cbElements = 4
.cLocks = 0
.pvData = VarPtr(SApByte.pvData)
.Bounds(0).lLbound = 0
.Bounds(0).cElements = 1
End With
CopyMemory ByVal VarPtrArray(pByte), VarPtr(SApByte), 4
CopyMemory ByVal VarPtrArray(pBytePtr), VarPtr(SApBytePtr), 4
'-----------------------------------------------------------------
dwReturn = 0
ZeroMemory ByVal VarPtr(lpWaveObject), Len(lpWaveObject)
'ZeroMemory lpWaveObject, H84 ' Len(WAVE_OBJECT)
With lpWaveObject
If dwType = sEllipse Then
.dwFlag = .dwFlag Or F_WO_ELLIPSE
End If
'********************************************************************
' 获取位图尺寸
'********************************************************************
.hWnd = hWnd
.dwRandom = GetTickCount()
ret = GetObject(hBmp, Len(stBmp), stBmp)
If ret = 0 Then
dwReturn = 1
GoTo result
End If
.dwBmpHeight = stBmp.bmHeight
'if lpWaveObject.dwBmpHeight 3 then dwReturn = 1:GoTo result
.dwBmpWidth = stBmp.bmWidth
'if lpWaveObject.dwBmpWidth 3 then dwReturn = 1:GoTo result
.dwWaveByteWidth = stBmp.bmWidth * H4 '2 ^ 2 'dwBmpWidth * 4
.dwDIByteWidth = (stBmp.bmWidth + stBmp.bmWidth * 2 + 3) And (Not H3) '(dwBmpWidth * 3 + 3) and ~3 ' ((W * 3 + 3) And (Not 3))
'********************************************************************
' 创建用于渲染的位图
'********************************************************************
hdc = GetDC(hWnd)
.hDcRender = CreateCompatibleDC(hdc)
.hBmpRender = CreateCompatibleBitmap(hdc, .dwBmpWidth, .dwBmpHeight)
'MsgBox .hBmpRender
SelectObject .hDcRender, .hBmpRender
'********************************************************************
' 分配波能缓冲区
'********************************************************************
.lpWave1 = GlobalAlloc(GPTR, .dwWaveByteWidth * .dwBmpHeight)
.lpWave2 = GlobalAlloc(GPTR, .dwWaveByteWidth * .dwBmpHeight)
'********************************************************************
' 分配像素缓冲区
'********************************************************************
.lpDIBitsSource = GlobalAlloc(GPTR, .dwDIByteWidth * .dwBmpHeight)
.lpDIBitsRender = GlobalAlloc(GPTR, .dwDIByteWidth * .dwBmpHeight)
'********************************************************************
' 获取原始像素数据
'********************************************************************
'With .stBmpInfo.bmiHeader
.stBmpInfo.bmiHeader.biSize = Len(.stBmpInfo.bmiHeader) ' H28 'len(BITMAPINFOHEADER)
.stBmpInfo.bmiHeader.biWidth = .dwBmpWidth
.stBmpInfo.bmiHeader.biHeight = -.dwBmpHeight '- .dwBmpHeight
.stBmpInfo.bmiHeader.biPlanes = 1
.stBmpInfo.bmiHeader.biBitCount = 24
.stBmpInfo.bmiHeader.biCompression = BI_RGB
.stBmpInfo.bmiHeader.biSizeImage = 0
'End With
hMDC = CreateCompatibleDC(hdc)
SelectObject hMDC, hBmp
ReleaseDC hWnd, hdc
GetDIBits hMDC, hBmp, 0, .dwBmpHeight, .lpDIBitsSource, .stBmpInfo, DIB_RGB_COLORS
GetDIBits hMDC, hBmp, 0, .dwBmpHeight, .lpDIBitsRender, .stBmpInfo, DIB_RGB_COLORS
DeleteDC hMDC
If .lpWave1 = 0 Or .lpWave2 = 0 Or .lpDIBitsSource = 0 Or .lpDIBitsRender = 0 Or .hDcRender = 0 Then
WaveFree lpWaveObject
dwReturn = 1
End If
'Debug.Print "WaveInit " .dwFlag
SetTimer hWnd, ByVal VarPtr(lpWaveObject), dwSpeed, AddressOf WaveTimerProc
.dwFlag = .dwFlag Or F_WO_ACTIVE Or F_WO_NEED_UPDATE
'Debug.Print "WaveInit " .dwFlag
WaveRender lpWaveObject
hdc = GetDC(.hWnd)
WaveUpdateFrame lpWaveObject, hdc, True
ReleaseDC .hWnd, hdc
End With
'********************************************************************
result:
WaveInit = dwReturn
End Function
'
' 一些特效
' 输入：dwType = 0 关闭特效
' dwType 0 开启特效，参数具体见上面
'
Public Sub WaveEffect(lpWaveObject As WAVE_OBJECT, ByVal dwEffectType As WaveEffectType, ByVal dwParam1 As Long, ByVal dwParam2 As Long, ByVal dwParam3 As Long)
Dim dwMaxX As Long, dwMaxY As Long
With lpWaveObject
' Debug.Print "WaveEffect " .dwFlag
Select Case dwEffectType
Case wClose '关闭特效
.dwFlag = .dwFlag And (Not F_WO_EFFECT)
.dwEffectType = dwEffectType
Exit Sub
'Case wrain '下雨
Case wLaunch '汽艇
.dwEff2XAdd = dwParam1
.dwEff2YAdd = dwParam1
.dwEff2X = WaveRandom(lpWaveObject, .dwBmpWidth - 2) + 1
.dwEff2Y = WaveRandom(lpWaveObject, .dwBmpHeight - 2) + 1
' .dwEffectType = dwEffectType
' .dwEffectParam1 = dwParam1
' .dwEffectParam2 = dwParam2
' .dwEffectParam3 = dwParam3
' .dwFlag = .dwFlag Or F_WO_EFFECT
'Case wWaves '风浪
'Case Else '默认
End Select
.dwEffectType = dwEffectType
.dwEffectParam1 = dwParam1
.dwEffectParam2 = dwParam2
.dwEffectParam3 = dwParam3
.dwFlag = .dwFlag Or F_WO_EFFECT
End With
End Sub
完
调用系统API使窗体下拥有阴影效果
using System.Runtime.InteropServices;
然后再窗口类的随便哪个地方加上：
const int CS_DROPSHADOW = 0x20000;
const int GCL_STYLE = (-26);
//声明Win32 API
[DllImport("user32.dll", CharSet = CharSet.Auto)]
public static extern int SetClassLong(IntPtr hwnd,int nIndex,int dwNewLong);
[DllImport("user32.dll", CharSet = CharSet.Auto)]
public static extern int GetClassLong(IntPtr hwnd, int nIndex);
最后在窗体的构造函数中加上：
SetClassLong(this.Handle, GCL_STYLE, GetClassLong(this.Handle, GCL_STYLE) | CS_DROPSHADOW);
vb.net2008
vb.net API 是将除特殊变量（如H20000）的Long都改成Integer
窗体的右侧和下方有阴影
Public Class Form1
Private Const CS_DROPSHADOW = H20000
Private Const GCL_STYLE = (-26)
Private Declare Function GetClassLong Lib "user32" Alias "GetClassLongA" (ByVal hwnd As Integer, ByVal nIndex As Integer) As Integer
Private Declare Function SetClassLong Lib "user32" Alias "SetClassLongA" (ByVal hwnd As Integer, ByVal nIndex As Integer, ByVal dwNewLong As Long) As Integer
Private Sub Form1_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
SetClassLong(Me.Handle, GCL_STYLE, GetClassLong(Me.Handle, GCL_STYLE) Or CS_DROPSHADOW)
End Sub
End Class
我们在微信上24小时期待你的声音
解答本文疑问/技术咨询/运营咨询/技术建议/互联网交流
微信二维码
移动版官网