MySql连接字符串

The port 3306 is the default MySql port.

成都创新互联是专业的夹江网站建设公司，夹江接单;提供成都网站制作、成都网站设计、外贸营销网站建设,网页设计,网站设计,建网站,PHP网站建设等专业做网站服务;采用PHP框架,可快速的进行夹江网站开发网页制作和功能扩展;专业做搜索引擎喜爱的网站,专业的做网站团队,希望更多企业前来合作!

The value is ignored if Unix socket is used.

Use this to connect to a server in a replicated server configuration without concern on which server to use.

Use SSL if the server supports it, but allow connection in all cases

This option is available from Connector/NET version 6.2.1

Always use SSL. Deny connection if server does not support SSL.

This option is available from Connector/NET version 6.2.1

This option is available from Connector/NET version 6.2.1

This option is available from Connector/NET version 6.2.1

This option is available from Connector/NET version 6.2.1

This option is available from Connector/NET version 5.2.2

Returns a MySqlDateTime object for invalid values and a System.DateTime object for valid values

Returns System.DateTime.MinValue valued System.DateTime object for invalid values and a System.DateTime object for valid values.

The use of auto enlist transactionscope (default behaviour) could cause trouble in medium trust environments.

Default behaviour is that parameters for stored routines (stored procedures) are checked against the server

Some permissions and value casting related errors reported fixed when using this connection option.

The default behaviour is to read tables mysql.proc/INFORMATION_SCHEMA.ROUTINES and try to map provided command parameter values to the called procedures parameters and type cast values accordingly.

This can be troublesome if permissions to the (aforementioned) sproc info tables are insufficient.

The driver will not automatically map the parameters so you must manually set parameter types and you must also make sure to add the parameters to the command object in the exact order as appeared in the procedure definition.

This option is available from Connector/NET version 5.0.4

Specifying DefaultTableCacheAge is optional, default value is 60 seconds.

This option is available from Connector/NET version 6.4

This option is available from Connector/NET version 5.2.6

From version 6.2 idle connections are removed from the pool, freeing resources on the client (sockets) and the server (sockets and threads). Do not manually keep (global) connections and open close. Keep connection object creation and disposal as tight as possible, this might be counterintuitive but pooling mechanisms will take care of caching well and your code will be cleaner.

This is the default behaviour.

Default values are 0 and 100.

Makes an additional round trip to the server when obtaining a connection from the pool and connection state will be reset.

This is useful in load balancing scenarios when available servers change you don't want 100 constant connections in the pool pointing to only one server.

Specified in seconds, the amount of time after connection object creation the connection will be destroyed. Destruction will only happen when connections are returned to pool.

A connection might be long lived in the pool, however the connections server settings are updated (SHOW VARIABLES command) each time returned to the pool. This makes the client use of the connection object up to date with the correct server settings. However this causes a round trip and to optimize pooling performance this behaviour can be turned off.

This option is available from Connector/NET version 6.3

This option is available from Connector/NET version 6.4.4

The Windows Native Authentication Plugin must be installed for this to work.

Number of seconds between each keep-alive package send.

This option is available from Connector/NET version 6.1.1

The default is 25, meaning that stored procedure meta data (such as input/output data types etc) for the latest 25 called procedures will be cached in client memory.

This option is available from Connector/NET version 5.0.2

This enables Visual Studio wizards that bracket symbols with [] to work with Connector/Net. This option incurs a performance hit, so should only be used if necessary.

This option is available from Connector/NET version 6.3.1

Use this one to specify a default command timeout for the connection. Please note that the property in the connection string does not supercede the individual command timeout property on an individual command object.

This option is available from Connector/NET version 5.1.4.

Use this one to specify the length in seconds to wait for a server connection before terminating the attempt and receive an error.

Use this one to instruct the provider to ignore any command prepare statements and prevent corruption issues with server side prepared statements.

The option was added in Connector/NET version 5.0.3 and Connector/NET version 1.0.9.

Use this one to specify which network protocol to use for the connection.

"socket" is the default value used if the key isn't specified. Value "tcp" is an equivalent for "socket".

Use "pipe" to use a named pipes connection, "unix" for a Unix socket connection and "memory" to use MySQL shared memory.

It's possible to explicit set the shared memory object name used for communication.

It's possible to explicit set the pipe name used for communication, if not set, 'mysql' is the default value.

It is the port value of -1 that tells the driver to use named pipes network protocol. This is available on Windows only. The value is ignored if Unix socket is used.

It's possible to explicit set the shared memory object name used for communication.

Use this one to specify which character set to use to encode queries sent to the server.

Note! Use lower case value utf8 and not upper case UTF8 as this will fail.

Note that resultsets still are returned in the character set of the data returned.

北大青鸟设计培训：C++连接mysql数据库的两种方法？

现在正做一个接口，通过不同的连接字符串操作不同的数据库(数据库培训数据库认证)。

要用到MySQL(MySQL认证Mysql培训)数据库，以前没用过这个数据库，用aC++(C++培训)ess和sqlserver比较多。

通过网上的一些资料和自己的摸索，大致清楚了C++连接mysql的方法。

盐城IT培训认为可以通过2种方法实现。

第一种方法是利用ADO连接，第二种方法是利用mysql自己的api函数进行连接。

第一种方法可以实现我当前的需求，通过连接不同的字符串来连接不同的数据库。

暂时只连接了mysql,sqlserver,oracle，access。

对于access,因为它创建表的SQL语句不太兼容标准SQL语句，需要做一些处理，这里暂时不说。

第二种方法只能针对于mysql数据库的连接，不过用这种方法不用安装MyODBC服务器程序。

不管用哪种方法，首先需要安装Mysql数据库，安装方法请看“mysql安装及一些注意点”。

最好安装一个Navicatformysql，方便操作mysql数据库。

下面分别说下这两种方法：(一)通过ADO连接MySql数据库1、通过ADO连接MySql数据库，首先得安装MyODBC服务器程序。

MyODBC版本要和MySql的版本对应上，否则会连接不上数据库。

我用的版本分别是mysql-5.1.48-win32.msi和mysql-connector-odbc-5.1.5-win32.msi。

安装好后，点击开始菜单-设置-控制面板-管理工具-数据源(ODBC)-用户DSN-添加-选择MySQLODBC5.1Driver。

如下图：然后双击MySQLODBC5.1Driver进行配置。

配置好可以点Test进行下测试(如下图)，如果能连上会弹出connectionsuccessful对话框。

mysql字符串拼接

说明 : string1,string2代表字符串,concat函数在连接字符串的时候，只要其中一个是NULL,那么将返回NULL

结果：

说明：将多个字符串连接成一个字符串，但是可以一次性指定分隔符～（concat_ws就是concat with separator）

GROUP_CONCAT([DISTINCT] expr [,expr ...] [ORDER BY {unsigned_integer | col_name | expr} [ASC | DESC] [,col_name ...]] [SEPARATOR str_val])

说明：

DISTINCT：去除重复值

expr [,expr ...]：一个或多个字段（或表达式）

ORDER BY {unsigned_integer | col_name | expr} [ASC | DESC] [,col_name ...]：根据字段或表达式进行排序，可多个

SEPARATOR str_val：分隔符（默认为英文逗号）

group_concat()函数在处理大数据的时候，会发现内容被截取了

其实MYSQL内部对这个是有设置的，默认不设置的长度是1024，如果我们需要更大，就需要手工去修改配置文件

怎么在mysql里做字符串连接

在mysql里做字符串连接主要用到“CONCAT”函数，主要使用方法如下：

这样查询出来的结果，就把原来ts_test里面的save_path和save_name组装到thumb字段里面！

分享题目：mysql符串怎么连接 mysql连接字符串的方法
文章来源：http://kswjz.com/article/ddcchej.html