chmod 755 /etc/sysconfig/modules/ipvs.modules && bash /etc/sysconfig/modules/ipvs.modules && lsmod | grep -e ip_vs -e nf_conntrack_ipv4

接下来还需要确保各个节点上已经安装了ipset软件包

yum install -y ipset

。 为了便于查看ipvs的代理规则，最好安装一下管理工具

yum install -y ipvsadm

。

11、安装docker

yum install -y docker
systemctl start docker & systemctl enable docker

12、设置开机启动kubelet

systemctl enable kubelet

13、修改hostname（非常重要，如果hostname相同会导致问题）

hostnamectl set-hostname XXXX

14、初始化Master节点

kubeadm init --kubernetes-version=v1.15.3 --apiserver-advertise-address=10.170.0.7 --pod-network-cidr=10.170.0.0/16 --service-cidr=172.20.0.0/16

现在最新版的为：1.15.3，在执行时，若版本出错，错误的信息中，会提示。

如果出现timeout是因为docker无法自动获取到images导致的，可以两种方式解决

15、手动pull images

docker pull mirrorgooglecontainers/kube-apiserver:v1.15.3
docker pull mirrorgooglecontainers/kube-controller-manager:v1.15.3
docker pull mirrorgooglecontainers/kube-scheduler:v1.15.3
docker pull mirrorgooglecontainers/kube-proxy:v1.15.3
docker pull mirrorgooglecontainers/pause:3.1
docker pull mirrorgooglecontainers/etcd:3.2.24
docker pull coredns/coredns:1.2.6
docker tag mirrorgooglecontainers/kube-proxy:v1.13.0  k8s.gcr.io/kube-proxy:v1.15.3
docker tag mirrorgooglecontainers/kube-scheduler:v1.13.0 k8s.gcr.io/kube-scheduler:v1.15.3
docker tag mirrorgooglecontainers/kube-apiserver:v1.13.0 k8s.gcr.io/kube-apiserver:v1.15.3
docker tag mirrorgooglecontainers/kube-controller-manager:v1.15.3 k8s.gcr.io/kube-controller-manager:v1.13.0
docker tag mirrorgooglecontainers/etcd:3.2.24  k8s.gcr.io/etcd:3.2.24
docker tag coredns/coredns:1.2.6 k8s.gcr.io/coredns:1.2.6
docker tag mirrorgooglecontainers/pause:3.1  k8s.gcr.io/pause:3.1

请注意版本号的问题，若是已更新，请相应的变更 。

16、修改docker源

kubeadm init --image-repository=mirrorgooglecontainers

17、重新执行第15步

18、启动成功之后可以看到集群已经启动成功，并且生成了worker加入集群的指令，只要在worker上执行即可加入集群

kubeadm join 10.170.0.7:6443 --token xrhtyd.b61v0mzuu6cea8qg \\
    --discovery-token-ca-cert-hash sha256:2e5cb96ef0be0e791acb923cf371303b13bda4613b4fd6d11a59bc17a7f8c3dd 

19、执行如下指令

mkdir -p $HOME/.kube
sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config
sudo chown $(id -u):$(id -g) $HOME/.kube/config

20、这时候输入kubectl get cs就可以查看服务的运行情况，确保都在正常运行

21、安装network addon(采用官方推荐的flannel方案，其中pod网段必须与之前init的时候设置的pod-network-cidr一致)

yum install -y wget
wget https://raw.githubusercontent.com/coreos/flannel/master/Documentation/kube-flannel.yml && kubectl apply -f  kube-flannel.yml

22、将worker join至master
至此集群已搭建完毕，这时候可以通过kubectl get nodes来查看各节点运行情况

安装Prometheus
1、在各个节点下载docker对应镜像

docker pull prom/node-exporter
docker pull prom/prometheus:v2.0.0
docker pull grafana/grafana:4.2.0

2、以daemonset方式部署node-export组件

vi node-exporter.yaml
---
apiVersion: extensions/v1beta1
kind: DaemonSet
metadata:
  name: node-exporter
  namespace: kube-system
  labels:
    k8s-app: node-exporter
spec:
  template:
    metadata:
      labels:
        k8s-app: node-exporter
    spec:
      containers:
      - image: prom/node-exporter
        name: node-exporter
        ports:
        - containerPort: 9100
          protocol: TCP
          name: http
---
apiVersion: v1
kind: Service
metadata:
  labels:
    k8s-app: node-exporter
  name: node-exporter
  namespace: kube-system
spec:
  ports:
  - name: http
    port: 9100
    nodePort: 31672
    protocol: TCP
  type: NodePort
  selector:
    k8s-app: node-exporter

kubectl create -f  node-exporter.yaml

3、部署prometheus组件

vi rabc-setup.yaml
apiVersion: rbac.authorization.k8s.io/v1
kind: ClusterRole
metadata:
  name: prometheus
rules:
- apiGroups: []
  resources:
  - nodes
  - nodes/proxy
  - services
  - endpoints
  - pods
  verbs: [get, list, watch]
- apiGroups:
  - extensions
  resources:
  - ingresses
  verbs: [get, list, watch]
- nonResourceURLs: [/metrics]
  verbs: [get]
---
apiVersion: v1
kind: ServiceAccount
metadata:
  name: prometheus
  namespace: kube-system
---
apiVersion: rbac.authorization.k8s.io/v1
kind: ClusterRoleBinding
metadata:
  name: prometheus
roleRef:
  apiGroup: rbac.authorization.k8s.io
  kind: ClusterRole
  name: prometheus
subjects:
- kind: ServiceAccount
  name: prometheus
  namespace: kube-system

4、以configmap的形式管理prometheus组件的配置文件

vi configmap.yaml 
apiVersion: v1
kind: ConfigMap
metadata:
  name: prometheus-config
  namespace: kube-system
data:
  prometheus.yml: |
    global:
      scrape_interval:     15s
      evaluation_interval: 15s
    scrape_configs:

    - job_name: \'kubernetes-apiservers\'
      kubernetes_sd_configs:
      - role: endpoints
      scheme: https
      tls_config:
        ca_file: /var/run/secrets/kubernetes.io/serviceaccount/ca.crt
      bearer_token_file: /var/run/secrets/kubernetes.io/serviceaccount/token
      relabel_configs:
      - source_labels: [__meta_kubernetes_namespace, __meta_kubernetes_service_name, __meta_kubernetes_endpoint_port_name]
        action: keep
        regex: default;kubernetes;https

    - job_name: \'kubernetes-nodes\'
      kubernetes_sd_configs:
      - role: node
      scheme: https
      tls_config:
        ca_file: /var/run/secrets/kubernetes.io/serviceaccount/ca.crt
      bearer_token_file: /var/run/secrets/kubernetes.io/serviceaccount/token
      relabel_configs:
      - action: labelmap
        regex: __meta_kubernetes_node_label_(.+)
      - target_label: __address__
        replacement: kubernetes.default.svc:443
      - source_labels: [__meta_kubernetes_node_name]
        regex: (.+)
        target_label: __metrics_path__
        replacement: /api/v1/nodes/${1}/proxy/metrics

    - job_name: \'kubernetes-cadvisor\'
      kubernetes_sd_configs:
      - role: node
      scheme: https
      tls_config:
        ca_file: /var/run/secrets/kubernetes.io/serviceaccount/ca.crt
      bearer_token_file: /var/run/secrets/kubernetes.io/serviceaccount/token
      relabel_configs:
      - action: labelmap
        regex: __meta_kubernetes_node_label_(.+)
      - target_label: __address__
        replacement: kubernetes.default.svc:443
      - source_labels: [__meta_kubernetes_node_name]
        regex: (.+)
        target_label: __metrics_path__
        replacement: /api/v1/nodes/${1}/proxy/metrics/cadvisor

    - job_name: \'kubernetes-service-endpoints\'
      kubernetes_sd_configs:
      - role: endpoints
      relabel_configs:
      - source_labels: [__meta_kubernetes_service_annotation_prometheus_io_scrape]
        action: keep
        regex: true
      - source_labels: [__meta_kubernetes_service_annotation_prometheus_io_scheme]
        action: replace
        target_label: __scheme__
        regex: (https?)
      - source_labels: [__meta_kubernetes_service_annotation_prometheus_io_path]
        action: replace
        target_label: __metrics_path__
        regex: (.+)
      - source_labels: [__address__, __meta_kubernetes_service_annotation_prometheus_io_port]
        action: replace
        target_label: __address__
        regex: ([^:]+)(?::\\d+)?;(\\d+)
        replacement: $1:$2
      - action: labelmap
        regex: __meta_kubernetes_service_label_(.+)
      - source_labels: [__meta_kubernetes_namespace]
        action: replace
        target_label: kubernetes_namespace
      - source_labels: [__meta_kubernetes_service_name]
        action: replace
        target_label: kubernetes_name

    - job_name: \'kubernetes-services\'
      kubernetes_sd_configs:
      - role: service
      metrics_path: /probe
      params:
        module: [http_2xx]
      relabel_configs:
      - source_labels: [__meta_kubernetes_service_annotation_prometheus_io_probe]
        action: keep
        regex: true
      - source_labels: [__address__]
        target_label: __param_target
      - target_label: __address__
        replacement: blackbox-exporter.example.com:9115
      - source_labels: [__param_target]
        target_label: instance
      - action: labelmap
        regex: __meta_kubernetes_service_label_(.+)
      - source_labels: [__meta_kubernetes_namespace]
        target_label: kubernetes_namespace
      - source_labels: [__meta_kubernetes_service_name]
        target_label: kubernetes_name

    - job_name: \'kubernetes-ingresses\'
      kubernetes_sd_configs:
      - role: ingress
      relabel_configs:
      - source_labels: [__meta_kubernetes_ingress_annotation_prometheus_io_probe]
        action: keep
        regex: true
      - source_labels: [__meta_kubernetes_ingress_scheme,__address__,__meta_kubernetes_ingress_path]
        regex: (.+);(.+);(.+)
        replacement: ${1}://${2}${3}
        target_label: __param_target
      - target_label: __address__
        replacement: blackbox-exporter.example.com:9115
      - source_labels: [__param_target]
        target_label: instance
      - action: labelmap
        regex: __meta_kubernetes_ingress_label_(.+)
      - source_labels: [__meta_kubernetes_namespace]
        target_label: kubernetes_namespace
      - source_labels: [__meta_kubernetes_ingress_name]
        target_label: kubernetes_name

    - job_name: \'kubernetes-pods\'
      kubernetes_sd_configs:
      - role: pod
      relabel_configs:
      - source_labels: [__meta_kubernetes_pod_annotation_prometheus_io_scrape]
        action: keep
        regex: true
      - source_labels: [__meta_kubernetes_pod_annotation_prometheus_io_path]
        action: replace
        target_label: __metrics_path__
        regex: (.+)
      - source_labels: [__address__, __meta_kubernetes_pod_annotation_prometheus_io_port]
        action: replace
        regex: ([^:]+)(?::\\d+)?;(\\d+)
        replacement: $1:$2
        target_label: __address__
      - action: labelmap
        regex: __meta_kubernetes_pod_label_(.+)
      - source_labels: [__meta_kubernetes_namespace]
        action: replace
        target_label: kubernetes_namespace
      - source_labels: [__meta_kubernetes_pod_name]
        action: replace
        target_label: kubernetes_pod_name

5、deployment文件

vi prometheus.deploy.yml
apiVersion: apps/v1beta2
kind: Deployment
metadata:
  labels:
    name: prometheus-deployment
  name: prometheus
  namespace: kube-system
spec:
  replicas: 1
  selector:
    matchLabels:
      app: prometheus
  template:
    metadata:
      labels:
        app: prometheus
    spec:
      containers:
      - image: prom/prometheus:v2.0.0
        name: prometheus
        command:
        - /bin/prometheus
        args:
        - --config.file=/etc/prometheus/prometheus.yml
        - --storage.tsdb.path=/prometheus
        - --storage.tsdb.retention=24h
        ports:
        - containerPort: 9090
          protocol: TCP
        volumeMounts:
        - mountPath: /prometheus
          name: data
        - mountPath: /etc/prometheus
          name: config-volume
        resources:
          requests:
            cpu: 100m
            memory: 100Mi
          limits:
            cpu: 500m
            memory: 2500Mi
      serviceAccountName: prometheus    volumes:
      - name: data
        emptyDir: {}
      - name: config-volume
        configMap:
          name: prometheus-config

6、Prometheus service文件

vi prometheus.svc.yml
kind: Service
apiVersion: v1
metadata:
  labels:
    app: prometheus
  name: prometheus
  namespace: kube-system
spec:
  type: NodePort
  ports:
  - port: 9090
    targetPort: 9090
    nodePort: 30003
  selector:
    app: prometheus

7、创建文件

kubectl create -f  rbac-setup.yaml
kubectl create -f  configmap.yaml 
kubectl create -f  prometheus.deploy.yml 
kubectl create -f  prometheus.svc.yml